(++) Second battery with short charging time about 30 minutes, so you can work through
(++) Battery charges to last, even if the device for a long time has not been used.
(++) State of charge is available to the charger.
(++) 2 speeds for drilling and screwdriving
(++) Torque settings from 5 to 20 nm and a drill setting (40 Nm), very good if screws are screwed in different materials, very important for plastic.
(++) LED-lamp good and is quite helpful in some corners.
(++) The screwdriver is comfortable to hold and is not too heavy for one adult.
If one has even noticed the shift position for forward and rewind, which is a very user-friendly device.
(++) Wide range in the lid, which was lacking (almost) nothing. Thus, very compact. In addition to the case you have only the screws and dowels may take.
Oh yes, a small spirit level in the lid would be the icing on the cake.
(O) Whether to keep the bits long? As already mentioned other reviewers, are the bits certainly China Import.
(-) Without lever tool you get almost nothing out of the trunk lid. The plastic fixing the trunk lid is steadfast and does not yield. Reminiscent of discounters tool case.
(-) Wrong Photo when charger is a SC60 Plus at (as in the product description also listed) and no ASC 30th
(-) Defective product description of the case lid: 65 pcs. Accessory
That says nothing at all! And the composition is really good, so that one is really equipped for any situation. Why not just to create another photo? What interested me photos of craftsmen with the machine in hand.
Conclusion:
The compactness of the case with virtually complete facilities and good in-the-hands-are the device with LED light are the key points, so 5 stars.
Note:
If you find this review helpful not, let me know why. Do not have illuminated some aspects? Give yourself a jerk and send a short note via comment or e-mail. An anonymous No two is not served, frustration on one side and unchanged lack of information on the other side.
Addendum of 12/08/2013:
After more than 5 months and almost daily use my judgment stops. The bits have been found, in fact as not particularly resistant. The most commonly used (eg PZ2) are already worn out. Annoyingly seems to me that the rubber mounts for long bits are torn, and no longer remain the bits in the holder.
On this occasion, I have found that there is still a photo of the contents, namely by the two craft images. Should I have overlooked or that has been added, the last picture?