Who of the English, like me, is not so powerful, which should definitely download the German assembly instructions from the HP of the manufacturer and print. Otherwise, a similar drama like me could play.
I will not go into detail here, but without removing the motherboard mounting the cooler was not possible. Then I also had mounted upside down the sealing rings, so that the cooler despite tight position screws strongly shook. What a drama!
So, second PC thank downloaded German Guide printed and then the installation was managed by a total of 2 hours.
The cooling performance, however compensated every effort. My system:
Case: Antec P280
Motherboard: Asrock 870 Extreme 3
CPU: Phenom 2 X4 955
Graphics card: Sapphire Radeon 6850
Temperature with Coretemp read. Idle 30 degrees under load (Prime95) 40 degrees
The processor then I have overclocked at 1.4V core voltage to 4000 Mhz. The NB 2600 without voltage boost.
After 1 hour under Prime 95 I had a temperature of 51 degrees.
Conclusion:
Pro: Super cooler at an affordable price.
Cons: Fummeliger and nerve-racking for installation opportunity wrench like me.
Nevertheless whopping 5 Stars.