Adapta ring for EOS 7D mark 2

Categories


  • M42 AF confirm adapter ring for EOS 600D  

    Pixtic - Adapter ring [AF-Confirm] for M42x1 objectives to mount housings Canon EOS EF / EF-S (Electronics)
    Perfect, no play, including with objo of 900gr. Bel machining piece that fits perfectly. No reservations on canon EOS 600D.
  • Adapter ring for Samsung NX 1000  

    Adapter ring Adapter ring Filter Adapter Step-up 40.5mm-52mm 40.5-52 (electronic)
    I had a 52 mm pole filters, I wanted to screw my NX 1000 camera because the lens diameter of 20 / 50mm Kit - is 40.5mm lens, I ordered from Amazon this adapter ring. (40.5mm to 52mm). It can be easily screwed onto the lens thread .., also the pole fi
  • Adapter ring for Polarizer  

    Step-Up Filter Adapter Ring 58mm-77mm Adapter (Electronics)
    As I have already bought an adapter ring that company here, and good experiences did so, I now have me a new lens to 58mm - 77mm adapter ordered. Like last time, a faster shipping and also of good quality. No complaints so again full points.
  • Adapter ring for camera lens - fits properly  

    Step UP or filter adapter ring connections: 52mm male thread and 58mm female thread (Electronics)
    The acquired adapter ring on 52 mm filter thread fit properly can thus be recommended by me. The price was also extremely low!
  • Step-Down adapter ring for 58mm filter on 67mm filter thread  

    Adapter ring, adapter ring, step-down filter adapters 67mm-58mm 67-58 (Electronics)
    I have a 58mm Canon 500D close-up lens and wanted to use these on my 70-200 f4, so I bought this adapter ring. Since I have a Cropcamera that something keinere filter diameter has no negative effects on the corners. The ring is very well made and the
  • Fits also for EOS 5D Mark 2 and EOS 50D  

    Canon Eyecup EB EOS10 / 300/500/300 (optional)
    After my "old" eye cup was lost to a camera, I wanted a new one. The designed hard, since the large number of spare parts and instructions did not make the decision easier. Also in this article here I was initially cautious because of the descri
  • SODIAL (TM) Adapter ring for the lens / filter 58-77mm camera  

    SODIAL (TM) Adapter ring for the lens / filter 58-77mm Camera (Electronics)
    This ring is very suitable to fit a 77mm filter to a 58mm lens. It is quite thin but strong.
  • Hahnel Battery for EOS 5D Mark II and EOS 7D  

    Hahnel HL-E6 7.2V 1650mAh Li-Ion Battery type Canon LP-E6 for EOS 5D Mark II, EOS 5D Mark III, EOS 6D, EOS 7D, EOS 60D, EOS 70D (with info-chip) (optional)
    I had been in the 5 D MK I batteries Hahnel company over 4 years without any problems in use and they are equivalent to the original batteries of Canon in terms of performance, fit, function, feel and durability. The same I can say now with the exper
  • Formatt adapter ring  

    Formatt Hitech HT85FSAM58 adapter ring (58mm) for modular holder (85mm) (Electronics)
    What can you say. A suitable adapter ring for the Formatt Hitech System 85th Work and exact shape as expected. I am completely satisfied.
  • Brief review of the Olympus CLA-12 Adapter Ring BLK for TCON-17X and XZ-1  

    Olympus CLA-12 Adapter Ring BLK for TCON-17X and XZ-1 (Accessories)
    The assessment refers only to those referred to above adapter. For my rare photo opportunities of the adapter to my Olympus fits beautifully because it has no influence on the light intensity of 2.8 my camera Stylus 1. The camera has an adequate zoom
  • Adapter Ring JJC RN-DC67A for Canon SX40  

    JJC RN-DC67A adapter ring (adapter, filter adapter) 67mm for Canon Powershot SX50 HS SX40 HS SX30 SX20 SX10 IS FA-DC67A (Electronics)
    Have unfortunately also this adapter ring in Filteradapterset of Timetrends24 (EUR 39.90) bought. UV and polarizing filters are in order. The adapter ring is not worth of cheap plastic and his money.
  • Filter Adapter Adapter ring 67-52  

    Step-Down Filter Adapter Adapter Ring 67mm-52mm (Electronics)
    have this adapter ring needed as an interim solution for my old filter equipment on my Canon EOS 60D, has proved just as I imagined it.
  • Must-have for EOS M Owner  

    Canon Mount Adapter EF-EOS M, black (Electronics)
    Hello friends of Canon's EOS M If you, like me, more EF / EF-S compatible Canon or have, + This adapter is a must buy. The 100-120 euros depending on the provider are well invested. The adapter is made of metal and is unusually heavy for size! The ou
  • Take good care of Canon EOS 5D Mark II  

    Canon Eyecup EB EOS10 / 300/500/300 (optional)
    The search for a replacement for the lost eye cup was not so easy. This eye cup fits well on my Canon EOS 5D Mark II.
  • (Almost) perfect on the Canon EOS 5D Mark III  

    Canon GP-E2 GPS Receiver for Canon EOS 5D Mark III, EOS 1D X, EOS 70D, EOS 6D, EOS M and EOS 7D (Accessories)
    I have received a month ago the Canon EOS GP-E2 for my 5D Mark III and could therefore already extensively tested him. He finds himself in buildings quickly the satellite and can be configured properly on the 5D Mark III. The battery lasts long enoug
  • Tested on a Canon EOS 5D mark II  

    Transcend 32GB CompactFlash Memory Card (CF) 133x TS32GCF133 (Personal Computers)
    I just received it today and test photo (perfect) and especially in FULL HD video 25images PAL / NTSC and dry at 30 frames / sec. I feel that on the camera's screen images are more jerky than they really are. By cons there is indeed a jump images eve
  • I do not use the little Gigtube on EOS 5 mark 2  

    Aputure Gigtube viewfinder with the shutter release cable for Canon EOS 5D Mark II (Accessory)
    I just received my first disappointment gigtube.Trés no charger at French American pin standard, Chinese and English instruction has not specified purchase I understand nothing, no connection Canon eos 5d mark 2 as requested in my order Question is t
  • Filter holder and adapter rings  

    49 52 55 58 62 67 72 77 9 x 82mm filter holder Filter Adapter Set DC21 (Electronics)
    Basically, from the other reviewers already everything geasagt. BUT BEWARE !!! Sorry, no measures of the filter holder are given. I am using an original Cokin filter holder with several filters already for 35 years and I have to connect bought this s
  • Adapter rings very good, filter holder unused  

    49 52 55 58 62 67 72 77 9 x 82mm filter holder Filter Adapter Set DC21 (Electronics)
    Adapter ring: I have just bought this package as it is much cheaper, even 12, xx to pay for a set of adapter rings as per original adapter ring 12th Although these are not originals these excellent fit to the filter thread of my lenses. The material
  • Adapter Rings: SUPER / filter holder: so goes  

    49 52 55 58 62 67 72 77 9 x 82mm filter holder Filter Adapter Set DC21 (Electronics)
    The adapter rings are made of metal and can fit up now wonderfully without sanding or scraping on each lens that's me come across so far. Unfortunately, the filter holder is made - of course - made lower quality plastic and * very * rigid. The filter