The application of the film, from the goodness Thanks to three copies provided, however, becomes quite difficult. Two copies I simply can not install properly, either to let the cover films not easily removed or remained still bubbles that were not removed. The third and last attempt did not prove easy. The film looked at first by the constant Across brushing to remove air bubbles from scratches and bubbles still remained there. I was appalled. In addition, the S-Pen was hard to use: the film is very rubbery (it must also be apparent, so as not to dissolve at the bent corner again) and the operation of the S-Pen felt as if one with the pen scrubs on an eraser, so how hard braking. That was not so.
But it was good that I had to wait a few days. The air pockets could be the time to remove all the surface and the radiergummiartige also disappeared. The use of the S-Pen is now no longer a problem at all. The film fits perfectly, even at the Edge, and has the positive properties of a matte film for me, that no glare and fingerprints. Just very pleasant!
You have to enter the film in my experience some time. The name "Healing Shield" is fully justified. I initially had some scratches on the film, because I'm moved the trapped air bubbles a little too hard on the body and was verzeifelt. After a few days, however, scratches and air bubbles were gone. Because the film is very soft and rubbery, it seems to be not only able to conform to the curved corner, so to speak, but also to compensate for slight scratches again.
If you have time to win a driving almost desperate struggle with the application of the film, this one should be a few days time to "settle" on the display to. Then it should also - function properly - as in my case. For me, the film is an ingenious combination with the Verus Case for touch Edge.