I had long been carried out in search of a scroll saw to craft and small hobby carpentry. Now Amazon diverse auction and price comparison platforms were the main sources of information. In short, it should be an instrument which is not too expensive, but comes as close as the professional equipment. The choice was made after much deliberation on the scroll saw with Vario control - but that was me be final convinced that both types can be used by saw blades and that a flexible shaft including extensive accessories is part of the equipment. The name Scheppach is there also specify as the reason, it is well known that it is a renowned German manufacturer. I bought the jigsaw finally in Amazon is due to the fact that lately the prices are unbeatable. I ordered from Amazon one evening and 1 1/2 days later came the postman with a big, well packaged boxed around the corner. Full of anticipation, I began to unpack immediately and as always - well protected by styrofoam was all neatly in a box. I checked the delivery is complete and already there I was impressed by the quality. Putting the jigsaw on a thin foam pad could be read in the manual, so I can only confirm the fact. This has noticeable effects on the volume and the smooth running of the machine. The default setting of the saw was with me perfect, I've checked the angle and had to adjust anything, but it would be no problem, because in my opinion much is self-explanatory on the device. After I was carried out the first test cuts confirmed my anticipation. Of course, it takes some practice but my expectations are fully met. Very good is the mounted work light, which can be arbitrarily set and it Sägeblattdüse which keeps the immediate work area of chips. The flexible shaft me the accessory kit is also very posititiv to mention, it is very useful to rework the cuts. The connection is very stable you have to make sure only that the shaft engages in the receptacle provided. The manual is a bit of improvement. There are missing two drawings for the use of blade adapter, but I quickly found on the net And another little tip at Scheppach, a thin foam mat could be used as a packaging material and use later as a base and to top it accessories would be a small protractor desirable because after a table adjustment of the vernier is likely to see the device as a rough adjustment. All in all a top device, the price - performance ratio is fully in order. An absolute buy recommendation from me