Has Pros and Cons

Previously we had a Miele Parquet Twister SBB 300, but which had to be replaced now.
Now it has become parquet SBB-3 a Miele Parquet.
In direct comparison, both nozzles have their advantages and disadvantages.

The new parquet SBB-3 is much lighter and smaller than the Twister SBB 300, but not as maneuverable by the lack of joint piece.
It comes very well with the parquet SBB-3 well in tighter corners, behind heating pipes, or under cabinets and beds,
what 300 by the higher joint piece and the greater depth was not possible with the Twister SBB.
Sucking with parquet SBB-3, however, is getting used to, because that she has no joint piece,
it must be done at a certain angle on the ground so that it lies smoothly.
This can be quite strenuous, depending on body size, or you have depending on who sucks, always adjust the length of the telescopic handle.
All in all, you can take the SBB Parquet 3 but very good and especially Parket-, or even laminate Gently suck and that is what counts.
By two roles at the nozzle and the like already mentioned very light weight, it glides easily over all smooth floor coverings such as laminate, parquet or tiles.
However, you also need a little longer with her, since the effective suction area is lower than as at the Twister SBB 300th
All in all, I can recommend this Parquet and everyone must decide for themselves what is the right nozzle for him.
I hope with my experience here described to a little help ;-)