Scope of supply:
- Duster (microfiber?)
- Doctor
- Staubentfernerklebestreifen (very useful)
- 3 x front foil
- 6 x rear sheet (3 times with 3 times and without Cutout for the Apple logo)
- Instructions
The film has a blue grid for better orientation on the device. That worked in practice very well. I first checked the fit and that's fine. That the film not covered everything, I knew now advance. But due to the rounded edges still gonna be otherwise. Think there will probably come what!
If you have peeled the first layer and the film placed (I prefer only a small piece off, put on the foil and then rub with the squeegee the film down further, while I prefer bit by bit from the first layer.
Then sticks the entire film, it can go to the elimination of bubbles.
In the method, it should, however, come to almost no bubbles, as long as no speck of dust on the screen were. Important in the context, the film itself has some dust on it (front and rear wipe). The small enclosed cloth is ok, but nothing more. Quick are specks of dust on it and they are distributed rather than to remove them on the display. But it is ultimately (wait a minute shake).
The bubbles can be relatively easy to push with the blade outward. Since the cover sheet is deducted, one can still build some pressure. Does not move the bubble you underneath her nen speck of dust. So the film again lift slightly to remove the grain of the film adhesive side (just to the small sticker) and call it with the supplied adhesive strips. This works well. Then stick back and possibly go to the doctor.
If that now everything is, the last layer can be peeled off. Here I noticed something negative that the small sticker is not well placed. Relieved a little more to the outside, the pull much. The actual film trying to hold something. The dissolves namely like this again. As I said, if you solve the sticker and a little more aufklebt to the top of it will be easier.
Have you taken off the last layer and there are small bubbles present, only very easy to work with the cloth. Scratches no longer walk away and are easily made. The cloth which is now just as good. Always wipe from center to edge.
Now, the film should fit perfectly and good looks.
The back is through the surface a little easier. Here fall small bubbles also not sooo fast.
Admittedly, the upper and lower part at the back of the iPhone are not protected with foil. But there is certainly still what come.
I can not recommend anyone to a bag (eg the company Fitbag made in Germany). Holds the device in addition fit!