That's much better!

I needed for my washing tower (Miele washing machine and Miele dryer) a combination connection to a standard Wandeinbausiphon for the 20mm Washer drain and a 10mm port for the discharge of condensate from the dryer.

I've been searching and came across the connection vono Xavax. However, this is for several reasons executed poorly.

- The angle at which the 8mm Connection is carried out is very inconvenient, so he gets too far out of the wall
- The auxiliary port is designed without pinecone profile, thus holding the tube is not so readily
- 8mm are too small for my 10mm hose
- No back flow assurance, under certain circumstances, this can be fatal for the dryer

I've found a much better solution:

The Dallmer washing device double connection in 1 "with the Angle-of Condensate connection in 1". Google helps.

- As a Rückflussicherung for both ports is already installed
- The connections are on the left and right
- The condensate circuit has a 9-14mm connection with pine cones Profile

No more complicated fiddling with an arrestor etc necessary. Now it looks perfect!