DC during the assembly, I have refined the weight bench. For the price you can not expect too much so. But the end justifies the means. Low angular deviations in the welded joints are present, but not so serious that the security would suffer. Since there is no indication of, I would say that the maximum load 50Kg dumbbell weight should not be exceeded, and at the end of the spars still a load suspension is necessary in ca.30cm height to allow trunk lifting at an angle down Asked Bank area. But as it is written, There is an entry-level price for the bank. Other weight benches cost more than 1,000 Euros and not in smaller apartments put up. Who buys this weight bench to sample what is possible, which is able to gather his own experiences and then either what really buy Expensive or at least rent a room in a gym because he finds that there is a lack of ceiling height and or room size. .. In the next stage, the existing bank is against such a design () replaced. The carrier spars get an extension in order to ensure a better level. The barbell rest I already coated with self-adhesive acoustic insulation from the drywall. I also mind do not change anything more to finding the optimum height of the shelves, I have inserted from all 4 sides hard cardboard in the height adjustment so that no play is detected. So I can also of night hour dumbbell banks without disturbing a resident of the apartment building. in this sense: Sport free!
