Taken Well in Grune the smart card reader with secure PIN entry is still quite "expensive toy", but which, if you follow the installation guidelines, functioning properly. In conjunction with the "ID App" of the new identity card aebeitet perfectly. One just needs to install the latest version of the driver for the device and the card of BMI app. Only then connect the unit and turn the new ID card free. These included the 5-digit PIN in a separate 6-digit PIN change on the card app. Like many users also, I started first, the query points in Flensburg. Went jiffy. Other applications with the new identity card will certainly work just as well. Whether I will (charged by the Bank) use in the future the cash card, I do not know. To charge since 200 Teuronen, my bank requires 5 mosquitoes per year in fees. I can see that not quite a. Otherwise, I'll wait and see what awaits me in the course of time online surprises to apply the new reader. Options there are already some. Even the online banking from TAN / i-TAN is converted to HBCI sometime. Some Kreditinstitue have thus already started.
The contested backlight display on the reader can be set "maximum" without problems via the device manager in "PIN dialogue" from "all" to. Therefore hardly interferes when the illumination of the display is turned OFF. The printing of 33 pages of the manual is a good idea, you want to quickly we will see something by. The device firmware version is still 1.0, but will probably soon changed to 2.0. Of course, the new PA should also be used with firmware 1.0, but only indirectly via the App ID of BMI. But everything is going atomatisch.
This also criticized "Einfummeln" the USB connector in the device accounted for because manufacturers from the USB cable was already connected to the card reader. Obviously the Herstller reads here. That would be commendable.
