the best loading / unloading

.... That there immoment for my purposes.
The unit has four charging programs (discharge is always to 0,90V):
1. Charge: [charging] only display the charging capacity
2. Discharge: [discharge -> charge] only display the charging capacity
3. Refresh: x times [Discharge -> Charge] to no growth: only display of discharge
4. Test: [Charging -> Discharge -> Charge] display only the discharge capacity

... Which is definitely missing is the display of the discharge capacity at the program Discharge. One can test batteries deposited on its remaining energy only by REFRESH - then you have just read Sometime before the 2nd unloading is complete. Comes certainly not often, because you stored batteries anyway mostly with batch charging and finally even takes a look at the supplied charging capacity.

The charging charging currents:
When fully equipped with 4 batteries is available as a charging current
200mA, 500mA, 700mA and 1000mA available 'there's something for everyone.

In addition to be equipped with 2 cells still 1500mA and 1800mA 'but you should not even think about it!

The Entladeladeströme:
Always is one-half of the charging current and max. 500mA. Better would be here for lack of time charging current = discharge current was.

I have two of them and am well prepared.