Speedport 701V as a repeater Speedport 503V as a router

I have the Speedport 701V used as a repeater for my Speedport 503V bought. However, for the repeater function I did not want to spend 3 times.
In its default configuration at 701V DHCP enabled IP address is set to 192.168.2.1. My Laptpo via LAN cable connected to the Speedport. Browser starts and entered 192.168.2.1, ENTER and the configuration program is started. Enter password

The following settings I've made at 701V:
Security menu / submenu item SSID & Encryption
1. SSID: just set the same name as the 503V
2. SSID invisible NOT checked!
3. Security Type WPA-Personal (just like at 503V)
4. Pre-Shared Key (PSK) exactly the same sequence of numbers as the 503V set.
Menu item Network / submenu LAN
1. IP address set to 192.168.2.2
Set 2. Mask to 255.255.255.0
Forsicht! If you save now, you have the browser herszellen again the connection, as described above
/ Submenu item DHCP
DHCP OFF, so that the PC's can obtain the IP address via the router 503V.
/ Submenu WLAN
1. Operational status = ON
2. Transfer Mode = 802.11 g (I have not worked with the setting 802.11g + 802.11b mixed, but it has)
3. Channel = 11 (is important that 503V radios to the same channel, man can set any channel
/ Submenu Repeater
1 = ON
2. encryption WEP =
3. Key = exactly the same sequence of numbers as in 503V (menu Repeater) set.
4. MAC Address: the MAC address of the 503V here (The MAC address can be found under Status / Details at 503V)

Not forget to save!

Settings at 503V:
Security menu / submenu item SSID & Encryption
1. SSID: just set the same name as the 701V
2. SSID invisible NOT checked!
3. Security Type WPA-Personal (just like at 701V)
4. Pre-Shared Key (PSK) exactly the same sequence of numbers as the 701V set.

Menu item Network / submenu LAN
1. IP address set to 192.168.2.1
Set 2. Mask to 255.255.255.0
/ Submenu item DHCP
DHCP ON to the PC's can obtain the IP address via the router 503V.
/ Submenu WLAN
1. Operational status = ON
2. Transfer Mode = 802.11.b + 802.11 g + 802.11n
3. Channel = 11 (is important that 701V radios to the same channel, man can set any channel
/ Submenu Repeater
1 = ON
2. encryption WEP = 128
3. Key = exactly the same sequence of numbers as in 701V (menu Repeater) set.
When looking at the "Update" button prints, place the router 503V repeater 701V and displays the WLAN incl. SSID and MAC address

Not forget to save