One year later: A new AJhr has begun. Diemal was after about 200m² conclusion. The device has been getting slower it're stuck. Defect
About 4 weeks later the replacement unit was there.
So I quickly finish the 70-100m² and fits.
This year: postponed infected and turned on. Nanu? -The Roller rotates and is more and more slowly until they reconnected.
That was before.
Good: The device is opened and even sought after Überltetäter.
BINGO !: The drive side Rillenkugerllager is a "China camp" and stuck. After only 100m² and approx 1 hour operation.
The grease in the bearing was clumped. So quickly mounted a brand bearings. Luckily there SKF or FAG.
Now I have to face the problem and Alko awaiting response and reimbursement of costs. I will report on the conduct of this part of Alko.
Conclusion: 2 unit defective within 8 hours of operation due to the China camp.
As one should expect but more man in Beijing, right?
To all appearances, it seems to have been built only in the newer series, because my neighbor uses his already about 4-5 year without any problems. Accordingly, I conclude that the more devices of the past 3 years are concerned.
The device itself is working otherwise very satisfactory and has enough power.
I'm curious as to propose the newly built SKF bearings :)
And how ALKO responding.
I'll report
Supplement: Oct / 2014
No response from ALKO.