Excellent idea - detailed implementation of optimization

The clip-close Mini door closers (bought on Amazon in October 2012) provides an astonishingly simple yet effective and flexible solution to ajar or interior doors closed to keep. It is mounted either on the right as on the left-opening doors with a few simple steps, can be very easily adjusted in three stages in his closing moment and at any time without residue or damage when removed with a handle back from the door. Reasons to keep at least a portion of its interior doors closed, there are enough either to prevent the exchange of heat, noise, moisture or dust between rooms. And just when you have small children, which of course hardly remember to close the doors behind him, is such a little help of great benefit.

The factual and simple design may not be for everyone, the door closer is hereby, and not least due to its compact size but pretty unremarkable. The color palette might be extended by one to two shades of brown and a shiny brass-colored version yet, but to act either inconspicuous or even in wood-colored doors appealing.

As only real deficiency I certainly felt the extremely cheap running knurled cap, with the spring and the bracket of the locking mechanism to be secured in the slip-on element. Due to the very soft and thin-walled injection molded plastic, the thread is in this cap completely worn or no longer exist after a few times fixed finger tightening, thus the cap failed their service. The cast (not cut) and thus quite rough and provided with ridges counterthread on the bracket increases the wear of the poorly-sized plastic part in addition. Here the manufacturer and its clients would do a big favor if he would replace the cheap plastic cap with a metal part. The few cents of additional costs could be pitched easily on the price, as the service life and the use value of otherwise as I said impeccable part would thus multiply easily. In this case, I would also assign full 5 stars.

I have finally secured the bracket with a nut (+ washer) and the previously hollowed plastic cap stuck on the mother for the purpose of obtaining the optics with hot glue. Thus, the part looks the same as before and also works perfectly and permanently.