The Sensation has a slightly curved surface. The film we are not, as with other mobile phones usually placed here precisely to the edge, but fitted into the buckle. So it covers not the whole screen, but it saves a about 1 mm sizes of rim. This millimeter corresponds to the curvature of the display.
So if you want to align the edge the film, must inevitably fail.
For the correct seat must be put directly to the center. Granted, this is not quite so simple. However, the film has a small crescent-shaped cutout for the camera. Taking this as a starting and reference point, you only have paralel hang up the sheet to the edge and it sits perfectly nestled almost invisibly on the display.
Air bubbles can be removed well. The film draws on a clean and dust-free display quite firmly, so you have to bring along some patience while removing evtueller bubbles. But then the film is virtually invisible. No problems or irregularities, if you do it right.
All this merely sets a clean and dust-free display, a steady hand, 5 min. Time, a good eye and some patience ahead.
I can fully recommend the film! Who so is not clear, should ask a friend who does not have 2 left hands or go to a cell phone business and they can be put on there.
It fits perfectly :)