Respect for hobbyists! Easy mounting with flush-mounted box behind possible!

In most cases, these blind cover is used to shut down an existing connection (incl. Lying behind wallbox). Therefore it is absolutely suitable.

But there are also countless other applications for a blanking plate. Especially for things, for the Gira currently offers no solutions. eg for not yet supported outlets / connections or simply for a visually well integrated attachment for various things.

In my case, I wanted next to the WHD flush Charger for Sonicare toothbrush still a nice attachment for additional brush heads have no equal a hole for another flush-mounted box to drill.
So my thought was: I take a capping frame with an outlet more, mount the blind cover and attach it to the toothbrush holder.

However, this will not so, since the blind cover has a mounting depth which requires a flush-mounted box behind. An installation plan on the wall does not go actually.

Here is my solution:
I put the retaining ring aside and cut off at the blank cover the catches of the support ring. The blind cover, I then glued with silicone in the covering frame and mounted on the additional brush holder.
Optically perfect, but with a little effort craft.

And one more request: If you feel well informed by my post, then click but please this contribution "Was this review helpful to you?" YES!
I say "Thank you!" for it and feel inspired for more product reviews that yes everyone likes to read.