019

Categories

  • Perfect - except for a small restriction  

    Rademacher Rollo Tron Turret Comfort, AP for 23 mm belt width, 15,233,019 (tool)
    The requirements were: - Window with south side shall be darkened by sunlight - Sun blinds off = high - Driving at night and in the morning down high (later on weekends) - Key lock against accidental switching - Summer / winter changeover - Standby i
    Buy at Amazon.com

  • Good, but inflexible cable that bothers constantly  

    Steinel Compact hot air blower HL Stick, safe footing allows hands-free operation, an integrated LED work light, Incl. 4 attachment nozzles, 350 W power, 400 ° to 500 ° C, ideal for hobbyists and modelers, 004,019 (tool)
    The device itself is ok But more than annoying the cable. It is inflexible and stubborn. It depends always straight. So if you want and align the device on the table, it is moved by the cable again. Mostly the unit falls by about even. Even stowing i
    Buy at Amazon.com

  • Rollotron 9500 Comfort  

    Rademacher Rollo Tron Turret Comfort, AP for 23 mm belt width, 15,233,019 (tool)
    I am very pleased with the execution of orders from Amazon. I think it is a pity that this apparatus was supplied by Von RollandShop24 andd not from Amazon directly. I had to pay 20 euros transportation costs. A parcel is much cheaper than a transpor
    Buy at Amazon.com

  • Easy installation, easy programming, I can recommend.  

    Rademacher Rollo Tron Turret Comfort, AP for 23 mm belt width, 15,233,019 (tool)
    after I returned a flush model (old building, comic Installation dimensions!) I'm with the Turret 9500 100% satisfied. The assembly instructions read short and even as "borrowing" the installation is carried out quickly. Immediately the spring s
    Buy at Amazon.com

  • Technology prima, look on the wall not nice  

    Rademacher Rollo Tron Turret Comfort, AP for 23 mm belt width, 15,233,019 (tool)
    I bought this Turret (must buy), because of the wall-Gurtwickler Box has only small dimensions: only about 3.5 cm wide, as suits or similar no customary Rollotron elec. Gurtaufwickler inside. Mounting and installation of Rollotron described well, wit
    Buy at Amazon.com

  • Rollo are conveniently control  

    Rademacher Rollo Tron Turret Comfort, AP for 23 mm belt width, 15,233,019 (tool)
    I had converted my blind to electric power a few years ago, with small gear motors 12 volts, unfortunately, these engines were (control) often broken and the dealer was no service and no E-parts, so I have now for some craft years, all unarmed in thi
    Buy at Amazon.com

  • Why must already be so mistreated factory cable?  

    Steinel Compact hot air blower HL Stick, safe footing allows hands-free operation, an integrated LED work light, Incl. 4 attachment nozzles, 350 W power, 400 ° to 500 ° C, ideal for hobbyists and modelers, 004,019 (tool)
    Device works well and is ideal for shrink tubing. Deduction of points there but due to the inflexible cable, which is also strongly kinked.
    Buy at Amazon.com

  • Rademacher 9500 Turret AP Rollotron Comfort, 23 mm Rademacher  

    Rademacher Rollo Tron Turret Comfort, AP for 23 mm belt width, 15,233,019 (tool)
    The turret winder can be installed well. The description is easy to understand and it works just fine. Is an easy handling.
    Buy at Amazon.com

  • Good work device, small improvements are desirable  

    Steinel Compact hot air blower HL Stick, safe footing allows hands-free operation, an integrated LED work light, Incl. 4 attachment nozzles, 350 W power, 400 ° to 500 ° C, ideal for hobbyists and modelers, 004,019 (tool)
    First thing first: the instrument is stable, it is well made, it will get very hot and it is practical to use. I use it mainly for processing of heat-shrinkable tubing of small to medium size, it is good to very good. Quite nice the Blinki-Blini Led'
    Buy at Amazon.com

  • Practical device without regulation  

    Steinel Compact hot air blower HL Stick, safe footing allows hands-free operation, an integrated LED work light, Incl. 4 attachment nozzles, 350 W power, 400 ° to 500 ° C, ideal for hobbyists and modelers, 004,019 (tool)
    In many electronic projects I previously had two problems. To solve both problems, I've bought the hot air fan and am satisfied. 1. Shrink Tubing I had to heat it with a lighter. Shrink Tubing can be heated on all sides, either because the machine is
    Buy at Amazon.com