7tlg.Robusl. CYL 9 MultiConst.Set 4-12mm

Categories


  • It really is possible  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    I have searched for the cordless screwdriver (Makita) drills that work even without hammer drilling in stone. Always rausholen the great machine for me is too annoying. Therefore I bought this drill. And what can I say, drill without impact even in B
  • Drill  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    I always buy only simple drills, because I thought, attach times ne lamp or a shelf ranging. Then we moved and I ordered these from Bosch and can only just say great. Although there are cheaper, I would buy again at any time and can only recommend it
  • Ideal for half-timbered houses  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    These drills are the best possible compromise and thus not optimal for all materials. Who a timber. Stone or metal drill needs, should also buy such. Especially in metal these drills are really only a stopgap when no metal drill (for whatever reason)
  • FINALLY! These are the drill  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    Technical Specifications: Multipurpose drill Robustline Set CYL 9 Multi Construction, 7-piece, diameter: 4/5/6/6/8/10/12 mm, working length: 40/50/60/60/80/80/90 mm, Overall length: 75/85/100/100/120/120/150 mm, suitable for practically all materials
  • Disappointing 78  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    Oriented to the consistently positive reviews I decided on the lookout for high quality concrete drill bits, me for this drill. The delivery was, like Amazon, quickly and reliably. The aim was, mainly to put several holes with 6mm drill bit in a fili
  • Super for masonry and tile!  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    Have been drilled with the drill bits tile, brick and concrete, since they have beaten super. No comparison to the cost drills that I had before. But for wood I use continues to be a special wood drill, also with metal I have the drill is not used.
  • Top drills  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    until now been tested only in calcareous sandstone. Are very good and durable. Packaging is however 'over styled'. So is not bad with the rubberized inner part. From simple plastic (and then 2 euros less) would have been enough.
  • Absolute Top 34  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    After my favorable discounter drill has acknowledged Set the service to my concrete floor, I ordered this drill set. This set all the variables are included, which are required as a handyman. Drilling in walls and ceilings, making it much easier. Hig
  • Good drill!  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    Looking for a replacement for my quite abgenudelten masonry bit I've encountered in a tool Forum to this Multi Construction drill. They were there praised as very good for stone and concrete, especially when drilling without percussion. I can now ful
  • Excellent quality 2 1  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    These drills I have already used for drilling of concrete, bricks, plasterboard, old walls (cement with stones) and wood. They beat look excellently at every material. Only when wood a short pre-drilling is recommended with a smaller diameter, so tha
  • Flawless drill in good packaging.  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    I have now about 100 holes drilled with all drills in this series and so far no broken drill. The drills really druchdringen any material without any problems. Wood, stone, concrete or plastic - everything perfectly! We recommend!
  • Good all-rounder set  

    7tlg.Robusl. CYL 9 MultiConst.Set, 4-12mm (tool)
    In conventional house walls of all kinds: Combined with a clever cordless impact wrench slide the drill in any wall. The often-used 6 equals twice. After about ~ 40-50 holes in any walls, the first 6 Series still looks exactly the same as the second