Ansmann Li-Ion Battery for Fuji NP 95 Digital Cameras

Categories


  • Perfect 550  

    Ansmann Li-Ion battery (3.7V, 1700mAh) for Fuji NP 95 Digital Cameras (Electronics)
    My location häufg professionally when traveling. As this is most is only 2-3 days stay is the DSLR me to lug around at some point become idle. The X100 has become the ideal travel companion. However, for emergencies you want despite the outstanding A
  • Sits slightly loose at the X100S  

    Ansmann Li-Ion battery (3.7V, 1700mAh) for Fuji NP 95 Digital Cameras (Electronics)
    This battery works so well us reliable as the original. The battery missing 2mm at the height, so that it is not held by the small hoes. If you open the battery compartment, the battery can fall out. But although he is only loosely in the subject he
  • just as good as the original 2 1  

    Ansmann Li-Ion battery (3.7V, 1700mAh) for Fuji NP 95 Digital Cameras (Electronics)
    I use the battery for a year in my Fuji X-S1 and can not find fault with his performance. Fit and performance are identical to the series battery.
  • Build too fast  

    Ansmann Li-Ion battery (3.7V, 1700mAh) for Fuji NP 95 Digital Cameras (Electronics)
    The performance is almost as good as the original battery. But when my battery is building the power too quickly. If only two white fields can be seen it only takes about 1 minute, then the camera turns off. The battery I have now several times and l
  • Excellent battery 2  

    Ansmann Li-Ion battery (3.7V, 1700mAh) for Fuji NP 95 Digital Cameras (Electronics)
    The Ansmann Li-Ion battery (3.7V, 1700mAh) for Fuji NP 95 digital cameras is with me using a Fuji X100 offers a low-cost substitute for the overpriced original battery with the same performance.
  • good performance, poor fit  

    Ansmann Li-Ion battery (3.7V, 1700mAh) for Fuji NP 95 Digital Cameras (Electronics)
    Battery performance corresponds to that of the original. Unfortunately, the battery is slightly thicker than the original Fuji NP-95. In my Fuji he clamped after insertion and can not be removed without tools. I stuck a tape as a "flag" on