Aukru set of 3 passive aluminum heatsink in various

Categories


  • Unfortunately only 2of3  

    Aukru set of 3 passive aluminum heatsink in various sizes for Raspberry Pi B + / B and P 2 Model B for sticking (Electronics)
    Do me this set for my Raspi 2 brought. Unfortunately, to make use of the 3 heatsinks only 2. (1 large and 2 small are in the set) Instead of you would need 2 large heatsink. (I had also previously can see :-)) But bearable for the price.
  • Super heatsink fit, exactly on Rasberry Pi 2 B (newest model)  

    Aukru set of 3 passive aluminum heatsink in various sizes for Raspberry Pi B + / B and P 2 Model B for sticking ... (Electronics)
    Very easy installation of heatsinks on Rasberry PI 2 as it is bonded to a sehrdünnem 3M double-sided tape, which means you just the other side must make the protector down and correct centering on the block and it was. Caution Only do not be surprise
  • Pairing Rapi Rapi I and II  

    Aukru set of 3 passive aluminum heatsink in various sizes for Raspberry Pi B + / B and P 2 Model B for sticking ... (Electronics)
    The coolers are suitable to both the "old" RaPis as well as the new. Splices are acidic and stick very well on it. Gladly again :)
  • Satisfied 51  

    Aukru set of 3 passive aluminum heatsink in various sizes for Raspberry Pi B + / B and P 2 Model B for sticking ... (Electronics)
    Item came as described and I have nothing auszusetzen.Tut it what it should. Is stuck, cools well. In use with a RPi model - B.
  • Does what it should. 44  

    Aukru set of 3 passive aluminum heatsink in various sizes for Raspberry Pi B + / B and P 2 Model B for sticking ... (Electronics)
    Easy to handle. The pull of the adhesive tape and stick the chips in Rasberry. The heatsink sticking to date without any problems. At 900MHz clock speed of Rasberry has about 60 ° (in continuous operation).
  • 2 Good, 3?  

    Aukru set of 3 passive aluminum heatsink in various sizes for Raspberry Pi B + / B and P 2 Model B for sticking ... (Electronics)
    am indeed become not quite clever, where the 3rd heatsink on the CPU and RAM but it is on the voltage transformers it sits at least not optimal. Does not matter, anyway cools well.
  • Self-adhesive  

    Aukru set of 3 passive aluminum heatsink in various sizes for Raspberry Pi B + / B and P 2 Model B for sticking ... (Electronics)
    Function properly. Even when overclocked Raspberry Pi there is hereby no heat problems. The installation is very simple and also the height of the heat sink should not be a problem for most craft projects.
  • Functional, conveniently fit!  

    Aukru set of 3 passive aluminum heatsink in various sizes for Raspberry Pi B + / B and P 2 Model B for sticking (Electronics)
    Who overclocked his Raspi knows how hot as a processor, and in particular the memory can be. Remedy these self-adhesive heatsinks, must of course to the housing at least allow a little air movement. The set includes 3 heat sink, the Raspberry Pi B I
  • stick, cool, finished  

    Aukru set of 3 passive aluminum heatsink in various sizes for Raspberry Pi B + / B and P 2 Model B for sticking (Electronics)
    All 3 have fitted easily and sit tight until today (perfectly thanks to the double-sided adhesive tape existing) ... have nothing to complain about.
  • for Banana Pi  

    Aukru set of 3 passive aluminum heatsink in various sizes for Raspberry Pi B + / B and P 2 Model B for sticking ... (Electronics)
    Bought for my Banana Pi this heatsink. The two small on the two Rahmriegel and large on the processor. This does not fill all the surface of the processor, but should cool anyway. The whole fits then also in a case, even though the processor and RAM
  • Fits well for model B +  

    Aukru set of 3 passive aluminum heatsink in various sizes for Raspberry Pi B + / B and P 2 Model B for sticking (Electronics)
    Property me + which ordered for the B. But only one used (2 are available on the B +) I consisting of copper had about the rest. Fit in order and in relation to the price it goes.