DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4

Categories


  • Super! 1085  

    DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4,500,826 - from the house DREHFLEX®
    Oh, and I thought, now it will get expensive, as I had thought to replace the damper times. But no. Never seen a washing machine from the inside, but I've hammer out to swap with the right tools, the parts of Use. Only you have to put aside to take c
  • Everything is running smoothly again  

    DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4,500,826 - from the house DREHFLEX®
    After careful research where the jumping and hitting our Miele comes. Have we decided to replace the shock absorber. Finally, costs a lot of money and if new, it is only because that just under 20 not the speech are worth. Our Miele is over 20 years
  • DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4500826  

    DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4,500,826 - from the house DREHFLEX®
    Already sufficiently described in the other reviews: very good !! I have the shock absorbers in a Miele W 830 Novotronic gewechselt.Die dampers (tipping machine) only from below or from the front (front panel open) changed werden.Eine very good descr
  • Genial! 7 128 6 19  

    DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4,500,826 - from the house DREHFLEX®
    My Miele washing machine, top loader W794 is, about 30 years old, so I do not remember exactly which. During spinning the drum beat as wildly corrupt and even the lid. The damper installed since washes my old baby when she was new :)) The dampers are
  • TOP product for example Miele NOVOTRONIC W839  

    DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4,500,826 - from the house DREHFLEX®
    After first two times my Miele W839 NOVOTRONIC went on fault because the Miele EL 200-D electronic control system is broken, I have been searching for the cause of the electronic defects. The cause was a spin cycle during the spin program due to defe
  • Goods as described, very fast delivery ...  

    DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4,500,826 - from the house DREHFLEX®
    For these dampers, although it is by friction damper and not like the built-in my engine oil pressure shock absorbers, but they fit perfectly, also function perfectly, can not say, of course, how long, the goods comply with any case the exact details
  • Super! 1084  

    DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4,500,826 - from the house DREHFLEX®
    Conveniently and at least fairly easy to change our machine from below. Simply the machine from the wall back, secure the rear feet with rubber mats against slipping and lean against the wall. Fast delivery, everything was great!
  • Miele - shock absorbers  

    DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4,500,826 - from the house DREHFLEX®
    Miele - Shock 8mm 120 N hole - Set of 2 - Suspa. Purchase and delivery without problem and quickly. Installation einfach.Kein imbalance more. Buy washing machine in May 1996. j. Auser Stoßdämpern all parts ok
  • Visually as original part  

    DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4,500,826 - from the house DREHFLEX®
    At first I was quite skeptical, since the original spare parts at least 3-4 times as expensive. Although I still can not make any statement about the durability after installation, one thing is clear: the dampers are 100% identical. Even the Suspa ty
  • Shock absorbers for Miele washing machine  

    DREHFLEX® - Miele - Shock 8mm 120 N hole - Set of 2 - Suspa - for 4,500,826 - from the house DREHFLEX®
    Flawless spare parts, which are from the same manufacturer, as they were originally installed in the Washer. Washing machine running like new.