GAH Alberts 801 960 wheel center set galvanized coating with PVC hose hook: 200 mm plate: 120 x 40 x 5 mm

Categories

  • Strong buy recommendation. 2  

    GAH Alberts 801 960 wheel center set, galvanized, coated with PVC hose, hook: 200 mm, plate: 120 x 40 x 5 mm (tool)
    Just perfect. Have hung on the holder 19 inch rims, with 235iger gums, easy to install, using the supplied plugs keep without problem.
    Buy at Amazon.com

  • Super stable, but  

    GAH Alberts 801 960 wheel center set, galvanized, coated with PVC hose, hook: 200 mm, plate: 120 x 40 x 5 mm (tool)
    for it to be suspended original Golf Stahlfelgen the bracket is too thick. It does not go through the wheel nut holes. Bin of a hole of the rim dodged se.
    Buy at Amazon.com

  • Hook strong scrap screws  

    GAH Alberts 801 960 wheel center set, galvanized, coated with PVC hose, hook: 200 mm, plate: 120 x 40 x 5 mm (tool)
    The actual support is very stable and the rubber enough. With the bare metal rims do not come in contact with me. The anchor would stop getting used to for the standard-yourselfer. The screws are but scrap, it broke through the more gentle tightening
    Buy at Amazon.com

  • Quality of mounts: 1A + | Quality of screws: Scrap!  

    GAH Alberts 801 960 wheel center set, galvanized, coated with PVC hose, hook: 200 mm, plate: 120 x 40 x 5 mm (tool)
    after the goods have been delivered in a short time I made my usual evening directly to the assembly of the wheel holders. To wall: plasterers concrete garage. Only been professionally measured and marked out, then 8-holes were drilled. The first whe
    Buy at Amazon.com

  • Very stable for 17 "tires with steel rim  

    GAH Alberts 801 960 wheel center set, galvanized, coated with PVC hose, hook: 200 mm, plate: 120 x 40 x 5 mm (tool)
    I have gained this product to finally store the stacked tires properly (s. Photo). Positive: - Assembly alone possible - Extension arm is long enough for tires up to 18 "then it might just be (depending on the type of rim) - Stable welded Ausleg
    Buy at Amazon.com

  • Sturdy holder for the wheels  

    GAH Alberts 801 960 wheel center set, galvanized, coated with PVC hose, hook: 200 mm, plate: 120 x 40 x 5 mm (tool)
    Much more there is to say. The holders are stable, galvanized and coated with plastic (PVC?) To protect the rim. Also positive: Good Metal anchors including screws included.
    Buy at Amazon.com

  • Very stable!  

    GAH Alberts 801 960 wheel center set, galvanized, coated with PVC hose, hook: 200 mm, plate: 120 x 40 x 5 mm (tool)
    + Do what they should. o But pay attention to the tire size, about 195 mm, the holder could become scarce. - Unfortunately, there is a scratch protection on the top screw. Have yourself what tinkered with Tesa Moll tape. - Holes in standard single ga
    Buy at Amazon.com

  • Easy Installation. Keeps bombproof.  

    GAH Alberts 801 960 wheel center set, galvanized, coated with PVC hose, hook: 200 mm, plate: 120 x 40 x 5 mm (tool)
    The mounting is very easy and absolutely secure. Nett might have been a brief reference to the borehole diameter. But otherwise the holders fulfill your purpose fully.
    Buy at Amazon.com

  • Wheel holders  

    GAH Alberts 801 960 wheel center set, galvanized, coated with PVC hose, hook: 200 mm, plate: 120 x 40 x 5 mm (tool)
    Have the wheel holders bought to get a little more space on the floor in the garage. The holders are delivered with screws and dowels. Everything holds bombproof on the wall. However, the brackets could be 3 cm longer, therefore only 4 points. Who ha
    Buy at Amazon.com

  • Robust design and low price  

    GAH Alberts 801 960 wheel center set, galvanized, coated with PVC hose, hook: 200 mm, plate: 120 x 40 x 5 mm (tool)
    The hooks are of very good quality and stable. However, they should after assembly (as already mentioned by other buyers) or similar with garden hose be coated to prevent damage to the rim. The included expansion shields hold reasonably well in concr
    Buy at Amazon.com

  • Very stable! 1  

    GAH Alberts 801 960 wheel center set, galvanized, coated with PVC hose, hook: 200 mm, plate: 120 x 40 x 5 mm (tool)
    Very stable solution with heavy duty anchors. I'm thinking you could probably also turn the car hanging. Welded square steel tube on a massive steel plate, not so silly little wires as in other sets. The screws / heavy duty anchor but only for stable
    Buy at Amazon.com