LogiLink AD0013 Support for HDD 2 5 "/ 3 5" Black

Categories


  • The ideal needed to put an SSD in a desktop  

    LogiLink AD0013 Support for HDD 2.5 "/ 3.5" Black (Accessory)
    No need to look further! A SDS (Samsung EVO 850,250 GB in my case) is less than 100 grams, then this plastic adapter is clearly sufficient. He just has a small flaw, but not so serious is that "center" the SDS, whereas it should put to one side
  • Everything is present in the kit, cheap but moderately practice  

    LogiLink AD0013 Support for HDD 2.5 "/ 3.5" Black (Accessory)
    All is well now, the power cable to the screw through the SATA cable and washers anti vibration rubber, to install an SSD in a location for hard disk 3.5 ". Cons: The holes for securing to the frame does not match the frame:; must pierce other, hence
  • Full and cheap  

    LogiLink AD0013 Support for HDD 2.5 "/ 3.5" Black (Accessory)
    Nothing to say on this article Everything is there and luckily the Molex adapter because without it, I had more free SATA connector on my diet. The adapter is plastic but thick enough to be rigid. The holes are perfectly aligned which I facilitated t
  • Perfect for mounting a SSD in a 3.5 rack "  

    LogiLink AD0013 Support for HDD 2.5 "/ 3.5" Black (Accessory)
    Perfectly adapted and further provided with hardware, a SATA cable and a power adapter (not supplied by the manufacturers of DD 3.5 "SSD). Fixings Spacers for ventilation SSD, very helpful but not too easy to mount, however for the price it's perfect
  • Perfect for the SSD  

    LogiLink AD0013 Support for HDD 2.5 "/ 3.5" Black (Accessory)
    Bought for a SSD, I think it serves its purpose! It's not super quality but it does a very good deal! Cables are also provided!
  • LogiLink AD0013 Support for HDD 2.5 "/ 3.5" Black  

    LogiLink AD0013 Support for HDD 2.5 "/ 3.5" Black (Accessory)
    Fulfills its function, but may have a few extra holes on the side to secure it otherwise in the rack. Ok for the price.