Magnetolink magnetic mounting for smoke alarms Set of 4

Categories


  • first check the smoke alarm if it is suitable for the holder  

    Magnetolink, magnetic mounting for smoke alarms Set of 4
    Against the magnetic attachment is in principle nothing to say, but you should look at the back of the alarm before buying. I have smoke detectors from VisorTech, have their support towards the ceiling a circular recess of 6 cm diameter (see photo),
  • Fast easy attachment .....  

    Magnetolink, magnetic mounting for smoke alarms Set of 4
    for smoke detector without drilling. This eliminates the only excuse to add itself smoke detectors. The fixtures on the ceiling and on the back of the detector hold together with magnets, ie for example can easily be separated for changing batteries
  • Magnetolink, magnetic mounting for smoke detectors  

    Magnetolink, magnetic mounting for smoke alarms Set of 4
    A mounting consists of two metal parts. The metal is bonded with the self-adhesive side, for example, on the ceiling, the other on the smoke detector. By small, fixed magnets to the smoke detector draws well with a light hand. The simple installation
  • not holding ... 1  

    Magnetolink, magnetic mounting for smoke alarms Set of 4
    I bought 13 smoke detectors from Flamingo to. (The product was offered to each other by Amazon) The adhesive areas hold great on the ceiling - whether concrete or Gibs But on the smoke detectors do not keep them. These all come down. Now I have this
  • Trash-One star too much.  

    Magnetolink, magnetic mounting for smoke alarms Set of 4
    Do not understand the good Rezis. Those things fly after 4 weeks in rows from the ceiling. There must be more reasonable to give what ??
  • Keeps the smoke detector fixed not really  

    Magnetolink, magnetic mounting for smoke alarms Set of 4
    Have also based on the recommendation of Amazon bought these magnets. Attaching easy, but the smoke detector has held less than 24 hours and is runtergeplumst. The adhesive is not suitable for such a smoke detector, which adheres only by their own me
  • Magneto Link, not considers reasonable  

    Magnetolink, magnetic mounting for smoke alarms Set of 4
    The idea is good, the implementation not. I bought the Mumbi RMF106 / RMF170RF with the essay for networking. Amazon gave me these magnets then recommended to directly. Unfortunately, I discovered that the magnetic force in these heavier smoke detect
  • Keeps well on Rauhfasertapete  

    Magnetolink, magnetic mounting for smoke alarms Set of 4
    Who has high ceilings and do not like working on head, has only one still attached here "in the normal position" both Magneto Links on smoke detectors and pushes the whole then - in the right place - at the ceiling. The "Abknöpfen" the
  • More practical than drilling  

    Magnetolink, magnetic mounting for smoke alarms Set of 4
    The magnetic attachment device replaces drilling and facilitates the function check and battery replacement enormous. To date, all the plates hold on the ceiling and smoke detectors ideally. However, I assume that - as with all other adhesive bonds -
  • Good handling and good grip  

    Magnetolink, magnetic mounting for smoke alarms Set of 4
    I have the sticking device Smoke detector used, and it worked perfectly. Both the adhesion of the bonding surfaces and the strength of the magnets is very good and perfectly adequate. Can I recommend.
  • Magnetic mounting for smoke detectors  

    Magnetolink, magnetic mounting for smoke alarms Set of 4
    I would always buy me those things again to smoke detectors. Ruckzuck the smoke alarm is taken from the ceiling for example, to replace the battery or carry out the Fuktionstest in a comfortable position. Installation is very simple by the self-adhes