MENGS® MPU-100 camera Solid aluminum L-shaped

Categories


  • Light aluminum angle  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    90 ° -Winckel very closely with high surface quality. Legs to the camera attachment with six rubberized bearing surfaces the a DSLR camera (Lumix G6) good fixation against rotation give.
  • 38mm outdoor Mass Arca Swiss compatible.  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    Fits MENGS PAN-0 3/8 "screw head and other 38mm quick-release fasteners, the edgewise bracket is stable bolted with Allen screws and can easily be removed if required using the supplied Allen key. Both sides (high-vertically) a stop screw, very good
  • Nikon D7100 and Nikon D 750  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    First, the L-bracket by Mengs is milled from a single block, he bestehts verstraubten of two parts. Nevertheless, the quality first impression is very good. I can not make any statements about the long-term stability with. Nikon D7100: The terminals
  • Bought for a Canon EOS 650D  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    The first impression is good. The L-bracket is stable and fits well. A screw at the end of short Sschenkels I had to remove so I could align the camera vertically.
  • Gibts in the Bay cheaper.  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    The angle is processed very stable and clean. On my Sony Alpha 77 he fits very well and there is enough room at the side to reach the remote and USB port. Along with a "iShoot 190x39mm Integrated clamp Clamp" from e-bay I built a stable Nodalpun
  • Not suitable for Olympus OM-D E 1!  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    The build quality and stability is very good indeed. The problem, however, that the lower base of the dovetail guide is thicker than the ARCA-SWISS-standard and therefore not drive with the Gitzo ARCA-Swiss adapter GS5160CDT usable. With the heads of
  • Very good price / performance ratio 1 3  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    I use the angle of my old D70, which I use exclusively in the studio. The rail is mounted on the left hand side of the D70 leads the angle upward. The cover of the USB connector I removed so that the camera is connected during the recordings via USB
  • ... On the Canon EOS 6D  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    The L-plate brings the EOS 6D to the stable point of the stand and that the vertical axis tripod. Even if you have switched to the portrait orientation. A real treat for the stability, especially in a lightweight travel tripod. In my L-plate only one
  • Very useful accessories 2  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    The article is easy and well-made, with no sharp edges. I use it with a hand strap, which I have attached to the eyelet at the left end shown in the picture. So I hold the camera at the long arm. The camera can be adjusted using the angle horizontall
  • Quite useful 4 1  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    Property me the part bought in order to make occasional upright shots from the tripod, including for Panorama. Principal advantage of such L-rail: The camera sits further centered on the tripod, be preserved so that gravity and the axis of rotation.
  • Quite good but too short slot  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    I have the L-shaped quick-release plate for the Canon 40D bought them together with the sliding plate (nodal point) to be able to use in the panoramic photography (portrait). One advance, materials and workmanship are ok. However, the vertical leg is
  • Light and stable  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    The L-rail is made of very resistant and distortion-light metal. It contributes to the camera on and hardly allows for quick mounting and dismounting of the camera from the tripod. By L-shape can change from landscape to portrait without the camera,
  • Just great! (& Shipping Faster)  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    I opted for this quick release plate, as it has been very low (about 20). For this price I do not have particularly good quality expected. This is why I was particularly surprised when she came in the mail today. The quality is just great! :) It is s
  • Excellent value for money 12  

    MENGS® MPU-100 camera Solid aluminum L-shaped vertical quick release plate for tripod-ball head with 1/4 "camera screw (Electronics)
    I bought the bar for my D800. Fits perfectly. Of course, the rail of RRS (Really Right Stuff) clings better to to the camera body, but it costs 5 times as much. The Gump rail is very well made, made of aluminum and compatible with Arca-Swiss system.