Mounting frame 2 5 "hard drive SSD 3 5" adapter

Categories

  • I'm very satisfied with the installation frame  

    Mounting frame 2,5 "HDD SSD to 3.5" adapter Hard Disk case (compatible with up to 2x 2.5 "hard drives HDD or SSD) drive caddy holder (Electronics)
    As a holder of a (2.5 ") SSD ordered. Power supply cable for SSD (old Molex connector on the new SATA connector) and a SATA cable are included. Also 8 screws for SSDs (One could 2 SSDs into the mounting frame type) and 4 screws to fix the frame
    Buy at Amazon.com

  • Cheap PC SSD Accessories  

    Mounting frame 2,5 "HDD SSD to 3.5" adapter Hard Disk case (compatible with up to 2x 2.5 "hard drives HDD or SSD) drive caddy holder (Electronics)
    I have this SSD kit ordered for my new Samsung SSD 850 Evo and installed in a mid-tower. As this indeed has enough slots, but due to the small size with two HDDs, an ATI graphics card and a 5700er Creative Xfi soundcard is well packed, the installati
    Buy at Amazon.com

  • fits for SanDisk Extreme Pro SDSSDXPS-240G-G25 240GB internal SSD (6.4 cm (2.5 inches), SATA III) black  

    Mounting frame 2,5 "HDD SSD to 3.5" adapter Hard Disk case (compatible with up to 2x 2.5 "hard drives HDD or SSD) drive caddy holder (Electronics)
    install easily, accurately and screw, etc. there. so everything has been said. install easily, accurately and screw, etc. there. so everything has been said.
    Buy at Amazon.com

  • Holders too short, exchange would be more expensive than buying new ...  

    Mounting frame 2,5 "HDD SSD to 3.5" adapter Hard Disk case (compatible with up to 2x 2.5 "hard drives HDD or SSD) drive caddy holder (Electronics)
    I assumed that these holders are standardized and of the connection here is always the same. Unfortunately, I was disabused and the thingy does not fit in my Lancool K7 housing, since the holder is too short and two connection points are missing! So
    Buy at Amazon.com

  • Interested Einbaurahmen  

    Mounting frame 2,5 "HDD SSD to 3.5" adapter Hard Disk case (compatible with up to 2x 2.5 "hard drives HDD or SSD) drive caddy holder (Electronics)
    My second computer will now also get an SSD as a boot drive. Although the good old Thermatake housing leaves a screwless mounting of drives to, but the possibility feht 2.5 "hard drives to be mounted directly. So an appropriate mounting frame must be
    Buy at Amazon.com

  • Just trash 2  

    Mounting frame 2,5 "HDD SSD to 3.5" adapter Hard Disk case (compatible with up to 2x 2.5 "hard drives HDD or SSD) drive caddy holder (Electronics)
    Unfortunately, I must add my voice to the negative reviews: 1.) holes do not match the drive bay 2.) and much worse: the supplied power cable broke up already when removed from the package on which veins were apparently not or badly soldered, not fix
    Buy at Amazon.com

  • Mounting frame 2,5 "HDD SSD to 3.5" HDD adapter mounting frame  

    Mounting frame 2,5 "HDD SSD to 3.5" adapter Hard Disk case (compatible with up to 2x 2.5 "hard drives HDD or SSD) drive caddy holder (Electronics)
    What should we write already great about this product? It does exactly what it was produced: It leaves 2.5 "hard drives and / or solid state drives in 3.5" adjust computer drive bays. ;) The screws and the connection cable (S-ATA) were also incl
    Buy at Amazon.com

  • Not mentioned frame with cable  

    Mounting frame 2,5 "HDD SSD to 3.5" adapter Hard Disk case (compatible with up to 2x 2.5 "hard drives HDD or SSD) drive caddy holder (Electronics)
    I was surprised that in addition to the mounting frame and the necessary cables were delivered, I had noticed before shopping, so I would not have bought the cable in addition. However, I am very satisfied. It fit everything.
    Buy at Amazon.com

  • Quick closures do not fit  

    Mounting frame 2,5 "HDD SSD to 3.5" adapter Hard Disk case (compatible with up to 2x 2.5 "hard drives HDD or SSD) drive caddy holder (Electronics)
    The frame does not fit for push frame closures, so I can not install my SSD. Should be part of the product description!
    Buy at Amazon.com

  • makes from beginning to end what it should  

    Mounting frame 2,5 "HDD SSD to 3.5" adapter Hard Disk case (compatible with up to 2x 2.5 "hard drives HDD or SSD) drive caddy holder (Electronics)
    The mounting frame makes it what it is. It integrates the SSD stable in the housing. No sharp edges and screws, and a S-ATA cable is still in the process with. Therefore 5 stars.
    Buy at Amazon.com

  • Accessories for SSD  

    Mounting frame 2,5 "HDD SSD to 3.5" adapter Hard Disk case (compatible with up to 2x 2.5 "hard drives HDD or SSD) drive caddy holder (Electronics)
    The frame is easy to install brackets into the designated PC. Screws for the SSD and the bracket in the PC are included. Similarly, the required (by me) Cable (SATA + power adapter from IDE to SATA). I have a Crucial m4 SSD installed personally (this
    Buy at Amazon.com