Pattex superglue Plastix 2 g and 4 ml PSA1C

Categories

  • Good activator  

    Pattex superglue Plastix 2 g and 4 ml, PSA1C (tool)
    The activator is working properly: It can also be otherwise problematic bonding plastics. The adhesive itself is nothing special, commercially available superglue (cyanoacrylate adhesives). Unfortunately, very little. But superglue can buy more too l
    Buy at Amazon.com

  • Special adhesives  

    Pattex superglue Plastix 2 g and 4 ml, PSA1C (tool)
    Very good for the problematic plastic, which can be combined with most other non-permanent adhesives. Here also keep the problem children PU and PE.
    Buy at Amazon.com

  • Cyanoacrylate will disappear in the Tube  

    Pattex superglue Plastix 2 g and 4 ml, PSA1C (tool)
    The adhesive is likely cyanoacrylate (at least it is), just like in any other superglue. The activator probably makes the difference. Unfortunately, I could not tell the difference because the activator has a very large swabs and so I do not get him
    Buy at Amazon.com

  • Dries easy on / too little  

    Pattex superglue Plastix 2 g and 4 ml, PSA1C (tool)
    The first adhesive that came to me was already dried up. Luckily I got from the dealer free replacement. Unfortunately, the glue trocket very quickly. Moreover, the amount of 3 grams very little. Much can not stick to it.
    Buy at Amazon.com

  • The Tube is unfortunately a bad design and glued after the first application  

    Pattex superglue Plastix 2 g and 4 ml, PSA1C (tool)
    The adhesive itself is OK, has glued together in my case, polypropylene (PP). On PP30GF (polypropylene, fiberglass reinforced) he fails, however, a pity. But what has most disturbed me, even after the first application, the cannula was glued on the t
    Buy at Amazon.com

  • properly 94  

    Pattex superglue Plastix 2 g and 4 ml, PSA1C (tool)
    If sometimes the front have children's shoes "Hunger", I glue them together with the Pattex glue. Lasts forever - superglue just - I would advise against cheap instant adhesives that hold namely not long!
    Buy at Amazon.com

  • only about 50% of our repairs were successful with it  

    Pattex superglue Plastix 2 g and 4 ml, PSA1C (tool)
    the adhesive was not so much better than normal superglue as I had hoped for that; Toys like Hasbro toy figures that we have so that repairs to smaller contact points, held on average only a few days
    Buy at Amazon.com

  • Top toys  

    Pattex superglue Plastix 2 g and 4 ml, PSA1C (tool)
    I have this beautiful adhesive used very often. Especially when our son's toys often times goes broke something. Thanks to this adhesive, we need not buy anything new ;-) and our son enjoyed the repaired toy! Strong buy recommendation!
    Buy at Amazon.com

  • The savior of each toy  

    Pattex superglue Plastix 2 g and 4 ml, PSA1C (tool)
    After many attempts to glue the different plastics of the toys of our son, I finally came across this adhesive. It sticks in total about 3 minutes two pieces really firmly and sustainably together. He does not seem to attack plastics, although the co
    Buy at Amazon.com

  • Sticks like anything!  

    Pattex superglue Plastix 2 g and 4 ml, PSA1C (tool)
    Have stuck with it a fender made of PP. In some places he was torn. I am absolutely amazed at how well it worked!
    Buy at Amazon.com