Raspberry Pi cooler Set

Categories

  • Keeps cool  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    Especially in the operation in an enclosure, the Raspberry PI heats up uncomfortably strong. Despite the simple double-sided adhesive for mounting this heatsink this problem effectively counteracted. Even without housing during operation under full l
    Buy at Amazon.com

  • Cooling slightly in Standart operation  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    Raspberry holds standard temperature only -2 to -3 degrees. Under full load, the heatsink become noticeable. Pi runs stabilier and under full load from -7 to -10 degrees.
    Buy at Amazon.com

  • Possibly a placebo ... But for the price conscience is calm.  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    I bought this for my waterblock model B-variant and the same applied. The Assembly was not a problem with my rough paws. All three heatsinks I have mounted in longitudinal direction, since the only coarser openings are available in my case. (Here bou
    Buy at Amazon.com

  • Raspberry Pi cooler kit (for mod. A and B)  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    Not even so schlechtt because that is derived only from the price. Whether the double-sided tape actually a thermal tape is dissipates the heat and not before this prevents unfortunately I can not say. Hope that overclockers have measured namely tidy
    Buy at Amazon.com

  • Cooling at a low price  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    To keep it short: The heatsink get me a thermal pad - remove protective foil, stick -> ready. For cooling performance: Without heatsink ~ 60 ° (800 MHz, 80% load @ OpenELEC) With heatsink ~ 50 ° (800 MHz, 80% load @ OpenELEC) Therefore, overclocked t
    Buy at Amazon.com

  • Thus the Raspi keep a cool head  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    I had bought the Kühlkörperchen because I (rather the Ethernet chips / USB hubs) suspected the heat development as a cause of crashes. Heatsink on it and since then peace. To process one has to say not much. The cut edges are clean and kept the heats
    Buy at Amazon.com

  • Rather cosmetic  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    I bought the coolers rather for reasons of appearance. Particularly when the adhesive film with the heatsink I can not really imagine that this route the heat particularly well be attached with. Since I do not have my Pi contacts also plays for me bu
    Buy at Amazon.com

  • Super fast delivered!  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    I have Wednesday nights (about 17:30 clock) ordered the cooler. By 20 clock they were dispatched, and on Thursday they came at 10:30 clock, even before the expected delivery date on Friday or Saturday. Quality is optimal, and still can not get 50 ° a
    Buy at Amazon.com

  • Cooling function useful.  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    My Raspberry Pi has reached without cooling in a plexiglass case after 2 days of continuous operation approximately 52 ° C (idle). Under load it went to just 62 ° C. Without overclocking (700MHz). With heatsink and at overclocking the Raspberry PI (T
    Buy at Amazon.com

  • Cool! In the truest sense of the word.  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    The three heat sinks can be set up easily by peeling off the adhesive protective film. Cooling the paste is not necessary. In the small heatsink for the voltage regulator must make sure that No other components are affected. The sit close to each oth
    Buy at Amazon.com

  • Cools very good  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    Since my Rasperry Pi operates continuously and I want to spare him something, I have decided on a few passive coolers. Cool the small computer extremely well. My Pi no longer exceeds the coolers, the 48 ° C.
    Buy at Amazon.com

  • Nice Stay cool  

    Raspberry Pi cooler kit (for mod. A and B) (Electronics)
    Top and fulfill their purpose fully. The assembly is very easy, the height quite flat but still enough for cooling
    Buy at Amazon.com