Sunshade Profox LH-73C for Canon EF-S 1: 4.5-5.6

Categories


  • Is worth the price 3  

    Sunshade Profox LH-73C for Canon EF-S 1: 4.5-5.6 / 10-18mm IS STM (Electronics)
    Since Canon fails sun visors, which should be called baffles actually resolve the lenses, then either just at an affordable provider. In Profox you get a part that fits just as well, as the original. The price is much cheaper.
  • I would not buy another 2  

    Sunshade Profox LH-73C for Canon EF-S 1: 4.5-5.6 / 10-18mm IS STM (Electronics)
    The point is: as some have pointed out, the iris sits just too tight. When top and losing weight, I'm afraid to damage the lens, so it is difficult to move. Then rather drauflegen a few bucks and buy the original.
  • It's also inexpensive  

    Sunshade Profox LH-73C for Canon EF-S 1: 4.5-5.6 / 10-18mm IS STM (Electronics)
    TOP price / performance ratio! If Canon to the good lenses already no lens hood (hood, sun visor) are to the original must not be bought at the offered price. The alternative Profox LH-73C for Canon EF-S 1: 4.5-5.6 / 10-18mm IS STM fulfills the expec
  • The aperture is scrap  

    Sunshade Profox LH-73C for Canon EF-S 1: 4.5-5.6 / 10-18mm IS STM (Electronics)
    Too bad there are no tulip from JJC. My copy has to be applied almost by force to the lens. Since my lens is too good ....
  • A little attention  

    Sunshade Profox LH-73C for Canon EF-S 1: 4.5-5.6 / 10-18mm IS STM (Electronics)
    Compared to the Canon-visors, like butter go up and down, this Streulichblende sits a little tight - so the donning and doffing has already boldly go from equip. Okay, but the originals cost too tight coal. Therefore 4 stars. No shadows or edges at 1
  • Impeccable, no difference from the original  

    Sunshade Profox LH-73C for Canon EF-S 1: 4.5-5.6 / 10-18mm IS STM (Electronics)
    After careful consideration, whether the original Canon Lens Hood is really worth their money, I have come to the conclusion that it is not. For this reason I decided for JJC alternative and I was not disappointed. Super processing, very stable and h
  • Sun visor clone at a reasonable price  

    Sunshade Profox LH-73C for Canon EF-S 1: 4.5-5.6 / 10-18mm IS STM (Electronics)
    This sun visor fits perfectly on the Canon lens. There are no visible shadows and the material seems durable, not cheap plastic. The lens cap is also seated on it. Conversely, mounted on the lens works there as a protection and is always close at han
  • Fits! 201  

    Sunshade Profox LH-73C for Canon EF-S 1: 4.5-5.6 / 10-18mm IS STM (Electronics)
    The panel fits just fine on the Canon 10-18mm lens STM. As mentioned in the other recessions it sits a little tight, but serves the purpose and is also at 10mm to see not in the frame! For the price an absolute buy recommendation!
  • Super alternative to expensive variant  

    Sunshade Profox LH-73C for Canon EF-S 1: 4.5-5.6 / 10-18mm IS STM (Electronics)
    The sun visor "LH-73C" by JJC fits right on the Canon EF-S 10-18mm Ultra wide-angle lens. The bezel is super processed and stable. Thus it represents a very good alternative to the rather expensive, original aperture of Canon is. Nothing wo
  • Perfect fit. 18  

    Sunshade Profox LH-73C for Canon EF-S 1: 4.5-5.6 / 10-18mm IS STM (Electronics)
    The panel goes well, it does not wobble and there are no shadows. I have no fear that they could be solved, because it is something to be fixed "sluggish". Cheap alternative to the original.