Sunshade Profox LH73B replaced EW73B for Canon EF-S

Categories


  • "Replaced EW73B" and the good!  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    Actually, I'm a self-confessed fan Canon. Because the quality is right. Is probably more chance that my lenses all come from Canon. I am not necessarily brand Geil, the competitors could convince myself just kind of never really. But with those who a
  • Fits super. Band does not stop and is too short  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    The panel fits perfectly on my 18-135mm STM is - Lens. You can also put in a good mood reversed in order to store the Kammera. The cover is good. A range for the lens should cover can best be knotted to form a loop. Then the lid would easily break aw
  • Very good replacement for original articles  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    I find dide Hood for 18-135mm kit lenses meinn super! Have it now constantly on it and the quality is fine. When attaching one must be at the beginning especially little careful and go ran later with feeling. To date, it keeps neatly with me. Does no
  • With small design flaw  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    For the price, the product cover is just fine. However, the "stress" when turning up or detection on the lens threaded through two small ridges is generated. For me these are already jumped out the second time. These are fairly small parts that
  • Super quality to price spikes  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    I have this panel preferred as it is cheaper by half than the original Canon and you still get a lens cap to it. From the free processing I can only say that it fits perfectly on my 17-85mm lens. Without problems, no press, no stronger turn nothing!
  • Does what it is intended. 1  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    Cheap alternative to orginalen Geli. Fits well and tight on 18-135er and is favorable. Had so far no material problems.
  • Fits perfectly 135  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    This sun visor fits as the title is clear from perfect - and turn off even after repeated assembly and. The delivery is still a lens cap included, fits perfectly well and can be removed without fumbling with screwed sun visor, since the support mecha
  • Good value for the top 6  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    Super Fast Shipping. The sun visor keeps (even upside down) very well. Good workmanship. For this price I can on the expensive original without.
  • Sun visor 5  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    The rather favorable sun visor fitted properly on my new Canon lens, was delivered promptly and corresponded all my expectations! May not always be original !!
  • Professional Lens Hood for the Canon EOS 650D with EF-S 18-135 IS STM  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    Professional Lens Hood for the Canon EOS 650D with EF-S 18-135 IS STM as an alternative to the original at a great price. Must buy.
  • Cheap alternative! 10  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    Have received today the Profox LH73B. To this was hardly what to say basically, is only a piece of plastic ... Fits like a glove to the EF-S 17-85mm IS USM. Since nothing wobbles because nothing stuck and the aperture can be smoothly up and turn off.
  • Somewhat sluggish  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    The lens hood serves its purpose, when placing one must zirkeln something can be even quite heavy screws on the bayonet.
  • Good alternative to the original 5 1  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    The lens hood fits perfectly on my Canon EF-S 17-85mm. It is precisely aligned and has a fixed Arretierungspunkt (red dot). The lens cap (Lens Cap) with an inside handle and rubber-band is at that. The one takes in the already very reasonable price,
  • Not just a replacement  

    Sunshade Profox LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS / STM Lens Cap + 67mm (Electronics)
    Sunshade LH73B replaced EW73B for Canon EF-S 4-5.6 / 17-85mm IS, EF-S 3.5-5.6 / 18-135mm IS Lens Cap + 67mm So, the sun visor is not just a replacement, but as good as the original but much more expensive. You can be on any problems and settle. Fits