[UASP optimized for SSD / aluminum] Inateck USB 3.0 external aluminum enclosure for 2.5 inch hard disk optimized for SSD 7mm 9.5mm SATA hard drive

Categories

  • Good housing 10  

    [UASP optimized for SSD / aluminum] Inateck USB 3.0 external aluminum enclosure for 2.5 inch hard disk optimized for SSD 7mm 9.5mm SATA HDD (Accessory)
    The case inspired by the strength and seems Travelstar 7K1000 1TB my cool. The assembly of the disk is not a problem but a small card play that supports the disk continues after the closed set but hey it is only present if handled the case. Only smal
    Buy at Amazon.com

  • I have no luck or ...  

    [UASP optimized for SSD / aluminum] Inateck USB 3.0 external aluminum enclosure for 2.5 inch hard disk optimized for SSD 7mm 9.5mm SATA HDD (Accessory)
    Hello everyone, I give you my personal experience with concerning this case. As for me, I never managed to make it work on a port usb 3, by cons no problem usb 2. I tried on several different ports but nothing happens. I tried with ssd (because of th
    Buy at Amazon.com

  • solid and simple installation box  

    [UASP optimized for SSD / aluminum] Inateck USB 3.0 external aluminum enclosure for 2.5 inch hard disk optimized for SSD 7mm 9.5mm SATA HDD (Accessory)
    the finish is a little gadget, but remains sober the cables are robust, and good connections, I use it as a transfer disk with a 256GB SSD it does not heat too, no worries recognition when you use it.
    Buy at Amazon.com

  • Recommended 60 3  

    [UASP optimized for SSD / aluminum] Inateck USB 3.0 external aluminum enclosure for 2.5 inch hard disk optimized for SSD 7mm 9.5mm SATA HDD (Accessory)
    The article of description. Case actually optimizing the speed of reading and writing (tests performed with an SSD Sandisk Ultra II 240 GB hard drive and a SATA III 7200 rev / min). The connecting cable is long enough and in good order. I am very sat
    Buy at Amazon.com

  • fine for cloning on ssd and then integrate the old hard drive of a laptop  

    [UASP optimized for SSD / aluminum] Inateck USB 3.0 external aluminum enclosure for 2.5 inch hard disk optimized for SSD 7mm 9.5mm SATA HDD (Accessory)
    I was looking for a system to transfer files when the hard drive cloning SATA to SSD and then place the hard drive recovered from the laptop: perfect with this camera and the USB port and the included power cable (need anything other): 340 gb cloned
    Buy at Amazon.com

  • Perfect for an SSD with Windows 8 and a USB 3.0 interface and supports UASP Version V2.0 PCI EXPRESS  

    [UASP optimized for SSD / aluminum] Inateck USB 3.0 external aluminum enclosure for 2.5 inch hard disk optimized for SSD 7mm 9.5mm SATA HDD (Accessory)
    This case perfectly demonstrates the UASP mode USB3.0 with an SSD. Tested on Samsung laptop via USB 3.0 interface (Intel 7 series interface) Windows 8 by default activated UASP mode and a 128GB Samsung SSD 840 PRO ... Read speed 407 MB / s read and 4
    Buy at Amazon.com

  • 5967 1 very well  

    [UASP optimized for SSD / aluminum] Inateck USB 3.0 external aluminum enclosure for 2.5 inch hard disk optimized for SSD 7mm 9.5mm SATA HDD (Accessory)
    Box very well. Easy assembly and drive well maintained inside. Case all a bit thick aluminum but which allows the drive to not be in direct contact with and therefore heat up more. Speed ​​operation and appointments, tests on SSD and HDD.
    Buy at Amazon.com

  • Fulfilled its role very well 4  

    [UASP optimized for SSD / aluminum] Inateck USB 3.0 external aluminum enclosure for 2.5 inch hard disk optimized for SSD 7mm 9.5mm SATA HDD (Accessory)
    Very good aluminum housing with, for once, a USB3 connection (SuperSpeed) solid (either a normal blue USB port). Attaching disc with screws; very good. Fulfilled its role expeditiously (UASP however, could not be tested due to lack of enough powerful
    Buy at Amazon.com