[USB 3.0 / SATA 6Gbps / No Screws / UASP] Inateck Case May 2 inch USB 3.0 External Hard Disk / SSD Enclosure With USB 3.0 cable 9.5mm to 7mm May 2 inch SATA SATA-I-II-III SATA HDD SATA and SSD Without tool optimized for SSD

Categories


  • Practical and effective 52  

    [USB 3.0 / SATA 6Gbps / No Screws / UASP] Inateck Case 2.5 Inch USB 3.0 External Hard Disk / SSD Enclosure With USB 3.0 cable 9.5mm to 7mm 2.5-inch SATA I, SATA II, SATA III, SATA HDD and SSD, SSD Optimized for, No tool (Electronics)
    The disc is fixed without screws. The flow rates are high, in any case with a magnetic disk (I have not tried it with an SSD). In short, this camera does the job.
  • No problem with the USB case  

    [USB 3.0 / SATA 6Gbps / No Screws / UASP] Inateck Case 2.5 Inch USB 3.0 External Hard Disk / SSD Enclosure With USB 3.0 cable 9.5mm to 7mm 2.5-inch SATA I, SATA II, SATA III, SATA HDD and SSD, SSD Optimized for, No tool (Electronics)
    Used with a Raspberry Pi 2, everything is ok. The hard drive enclosure is self-powered USB ports Raspberry so no need extra power supply (not included in the package besides, there was only one USB cable 3). For this to be possible, I had to feed the
  • Nickel! 33 245 1493  

    [USB 3.0 / SATA 6Gbps / No Screws / UASP] Inateck Case 2.5 Inch USB 3.0 External Hard Disk / SSD Enclosure With USB 3.0 cable 9.5mm to 7mm 2.5-inch SATA I, SATA II, SATA III, SATA HDD and SSD, SSD Optimized for, No tool (Electronics)
    This box works wonderfully well with my Sandisk SSD. The transfer rate exceeds 200 Mbytes writing and no need for an external power supply ...
  • The new model is absolutely excellent  

    [USB 3.0 / SATA 6Gbps / No Screws / UASP] Inateck Case 2.5 Inch USB 3.0 External Hard Disk / SSD Enclosure With USB 3.0 cable 9.5mm to 7mm 2.5-inch SATA I, SATA II, SATA III, SATA HDD and SSD, SSD Optimized for, No tool (Electronics)
    Among the different housing models on this page, I commented the New Design 3.0 Model FE2006. These boxes are invaluable to convert an internal hard drive SATA 2.5 "hard drive into a portable for additional storage and also to restore access to data
  • Drive Enclosure  

    [USB 3.0 / SATA 6Gbps / No Screws / UASP] Inateck Case 2.5 Inch USB 3.0 External Hard Disk / SSD Enclosure With USB 3.0 cable 9.5mm to 7mm 2.5-inch SATA I, SATA II, SATA III, SATA HDD and SSD, SSD Optimized for, No tool (Electronics)
    Simple and effective sliding plastic housing. No problem with Windows 7 the case is detected. size 130 * 82 * 14 to 60 grams. A small blue LED indicates disk activity. On one of the two boxes that I have ordered the blue LED was not nempĂȘchait HS whi
  • Good, but average cable  

    [USB 3.0 / SATA 6Gbps / No Screws / UASP] Inateck Case 2.5 Inch USB 3.0 External Hard Disk / SSD Enclosure With USB 3.0 cable 9.5mm to 7mm 2.5-inch SATA I, SATA II, SATA III, SATA HDD and SSD, SSD Optimized for, No tool (Electronics)
    The case work properly - but not on a Lenovo Yoga 2 with the supplied cable. It works well with another cable
  • & Supports USB 3.0 UASP] Inateck case 2.5 inch USB 3.0 external hard drive / SSD Enclosure With USB 3.0 cable 9.5mm to 7mm 2  

    [USB 3.0 / SATA 6Gbps / No Screws / UASP] Inateck Case 2.5 Inch USB 3.0 External Hard Disk / SSD Enclosure With USB 3.0 cable 9.5mm to 7mm 2.5-inch SATA I, SATA II, SATA III, SATA HDD and SSD, SSD Optimized for, No tool (Electronics)
    The disk that I put is a Samsung, it is very well adjusted in its box. Lightweight and maneuverable enough for his drawer runner, fast and efficient. occur is of good quality and not bulky. I am very satisfied. Suitable for hard drive and 2.5 inch SS
  • Simple and effective for incredible speed with SSD  

    [USB 3.0 / SATA 6Gbps / No Screws / UASP] Inateck Case 2.5 Inch USB 3.0 External Hard Disk / SSD Enclosure With USB 3.0 cable 9.5mm to 7mm 2.5-inch SATA I, SATA II, SATA III, SATA HDD and SSD, SSD Optimized for, No tool (Electronics)
    The case comes with a foam pad, a cable usb 3.0> normal usb. This case is very light. There are no instructions at the same time, there is no need. I put a 240GB SSD (a sandisk), I clipped the disc and then closed the case. I connected the USB cable