Wolfcraft 5205000 Universal angle length 300 mm with exchangeable plastic stop 200 x 300

Categories


  • Ansich good but needs improvement  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    I set the angle now for some time, and the initial enthusiasm has subsided. In itself it is good and I use it always like - only the 90 ° angle deviates at my copy and 0.5mm. That may sound low, but is in practice actually often too much. I hold the
  • Class Universal Bracket for parquet laying  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    Have so my parquet floor laid. For me, the angle has fully been sufficient and would buy it again at any time.
  • Well, going so 2  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    While I'm working mostly only undemanding things made of wood where it does not depend on half a millimeter, but the holes in the angles are so large that I could put three mechanical pencils alongside each other in a hole. If one takes NEN thick blu
  • Does what it is supposed 30 1  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    Property me the part ordered despite the partially negative comments, ie the angle got the ego is good! No sharp edges or problems with erroneous "angles" .. in my fits all .. (at least as far as I could measure it with a protractor ..) Whe
  • I had no great expectations, but I have still not often used, but does not have any defects, am satisfied, thank you  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    I had no great expectations, but I have still not often used, but does not have any defects, am satisfied, thank you
  • Direct buy something expensive  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    Unclean processed, printed scale incorrectly. If between the front and back of a tolerance of 2mm is present, how can you can use it to operate properly?
  • Unfortunately painted  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    This angle I would buy today no longer. Unfortunately, the painting is not quite uniform, so that it may lead to measurement errors if you just end up at a paint bubble. Although he is quite universal, but if you have problems with it to determine th
  • Finally found ... 6  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    For quite some time I read looking for a useful angle for my woodworkers. Accustomed quickly the item has been delivered. Something I have been surprised by the variety of possibilities offered by the angle. All I know and certainly a lot more opport
  • Good helper 1  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    Helped me a lot when laying laminate. Only the fact with the printed numbers could have been handled better, but would not deter me from a repeated purchase.
  • Right Angle?  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    The ideas that are stuck in this angle good, but the implementation is poor. Especially in this part is indeed the "right angle" important. In my copy runs on 300 mm the angle about 2 mm from the target.
  • Mediocrity 4  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    This angle is actually very good. He has endless function to mark and measure. Each of the home ground moved or something like Schreinert should so specify an angle. Unfortunately, there also shortcomings. The angle is the longitudinal legs very unst
  • ... And Wolfcraft its name does not necessarily honor  

    Wolfcraft 5205000 Universal angle, length 300 mm with exchangeable plastic stop 200 x 300 (tool)
    The 500mm Universal angle from the same manufacturer was too great for certain types of work, so I took the first 300mm in the hope to speed up certain on / elevation work. Unfortunately, and is the only limited way. In principle, an optimal idea, es