Top Gaming Monitor 1

Good day,
I got the monitor on 11/21/2014. Shipping was, as usual, Amazon, quickly and flawlessly. The monitor has not yet Lichhöfe pixel errors etc.,
Unfortunately, I first had to find that the monitor was delivered with the firmware V1. I immediately began to put me with the firmware upgrade to V2 apart and after I took 30 minutes for the implementation of the upgrade I can only encourage every owner, to do so!
I've never worked with Linux, yet geflashet a monitor or other device via Shell.
Strictly followed these instructions to the monitor safely and to flash quickly:
[...]

But two things I want to still add:
1. If you're not sure on which I2C port of the monitor is connected, let you sign a list of I2C ports and then selects each. If you this "pattern" is displayed, you have the respective port number and I use to take the subsequent steps.
[...]
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I want to sample file / dev / i2c-1.
I want to sample Address Range 0x03-0x77.
Continue? [Y / n]
0 1 2 3 4 5 6 7 8 9 abcdef
00: - - - - - - - - - - - - -
10: - - - - - - - - - - - - - - - -
20: - - - - - - - - - - - - - - - -
30: - - - - - - - 37 - - - - - - - -
40: - - - - - - - - - 49 - - - - - -
50: 50 - - - - - - - - 59 - - - - - -
60: - - - - - - - - - - - - - - - -
70: - - - - - - - -

2. Invite the firmware of the BenQ website down, they copied to the folder in flashrom Linux operating system after you have imported flashrom. After the .rar directory to the bin file unpacked to obtain.

As already mentioned, the whole procedure took about 30 minutes. I have been doing work with a laptop that an Intel processor and NVIDIA graphics card.

To come again on the monitor back ... he was just the best! I play exclusively CS: GO and for that he is my first choice.