ideal successor to burlap Multiswitches

There is not much to say about the "Unicable multiswitch".
This works fine.
It is important that all devices on the Unicable port must support this also.
Advantage is that you in this multi-switch up to 8 Unicable-ready
Receiver on a cable either by normal satellite distribution can btreiben to terminal box.
So as an example would be:

A terminal box with 4-way splitter and DVB-S / S2 Quad Tuner or 2x Twin Tuner.
Thus a TV server is no more obstacles.

As a second example:

If you use an existing CATV distribution through sockets with F connector.
So you have to exchange them with F connector which only the connection boxes.
Also, since you can still each by 2-fold distribution per a twin tuner with 4 doses
connect.

The great thing, one must take into account any restrictions on reception,
as with the older "single cable solution", where one with shifted frequencies
had to dispense entirely with the reception of certain programs.
Also no reception from several satellites was possible there.
Everything that works with "Unicable" now.

Personally, I'm now on a conventional multi-switch on Unicable
therefore changed, because I wanted to draw any new cables, I just
Want to run 2 twin tuner to a cable. I also remain for another
Rooms as an option 4 additional recipients. Otherwise I would have alone for this
2 Twin Tuner 3 having to lay more cable, but that's what I did not want to.

This Unicable multiswitch is a lot more compact than
the old 8x multi-switch and uses less power.

My Conclusion:
The Uncable multiswitch has the old Star cabling
conventional multiswitch outranked.