AEG 97136 Compressor KD 7.0 - with digital printing code and shutdown LED lighting 12 Volt max. 7 bar / 100 psi incl. Accessories

Categories


  • Not suitable for adapter  

    AEG 97136 Compressor KD 7.0 - with digital printing code and shutdown, LED illumination, 12 Volt, max. 7 bar / 100 psi, incl. Accessories (Automotive)
    I had not bought it mainly for dressing-down by car plug. Wanted to inflate so the cellar my bike, but with the adapter for standard electrical outlet does not work this device. Too bad so I might send him back.
  • The name AEG deceptive.  

    AEG 97136 Compressor KD 7.0 - with digital printing code and shutdown, LED illumination, 12 Volt, max. 7 bar / 100 psi, incl. Accessories (Automotive)
    The device is loud and pumping only when the engine of the vehicle. The hose is to accommodate bad after use. The cable to the car is not always long enough. I have to check the tire pressure of the residential trailer, where 4.5 bar are required, yo
  • Tires are already hard work for this device  

    AEG 97136 Compressor KD 7.0 - with digital printing code and shutdown, LED illumination, 12 Volt, max. 7 bar / 100 psi, incl. Accessories (Automotive)
    I have this device for the car to buy when a flat tire to have a pump in an emergency. However, as described in other reviews already stated in the instructions that it is not large tires may be used> 225cm. However, this would be in my car, in pr
  • Details are in the manual, not on the box or in the online product description  

    AEG 97136 Compressor KD 7.0 - with digital printing code and shutdown, LED illumination, 12 Volt, max. 7 bar / 100 psi, incl. Accessories (Automotive)
    is in the manual: The compressor is not to inflate truck, tractor tires, large car tire (tire width> 225 mm) or other large-volume items such as inflatable boats, etc. provided, ... () ... Pump, never larger items such as truck Tractor tires, air
  • Good service and function as bechrieben  

    AEG 97136 Compressor KD 7.0 - with digital printing code and shutdown, LED illumination, 12 Volt, max. 7 bar / 100 psi, incl. Accessories (Automotive)
    Unit is connected with the vehicle stationary and the engine turned off to the 12V car socket. In plug is a 10A fuse; This is consistent with the protection of the socket max.120 Watt. Note the AC adapter the purchase recommendation are all too weak
  • AEG 97136 Compressor KD 7.0 - with digital printing code and shutdown, LED illumination, 12 Volt, max. 7 bar / 100 psi, i  

    AEG 97136 Compressor KD 7.0 - with digital printing code and shutdown, LED illumination, 12 Volt, max. 7 bar / 100 psi, incl. Accessories (Automotive)
    The current supplied by you compressor operates in 12 volt operating properly. However, when using the recommended you adapter for connection to 22o volts beats the joy into trouble. The adapter is absolutely not suitable to operate the compressor at
  • After 10 minutes of operation unfortunately already broken!  

    AEG 97136 Compressor KD 7.0 - with digital printing code and shutdown, LED illumination, 12 Volt, max. 7 bar / 100 psi, incl. Accessories (Automotive)
    After 2 trial and a total of about 10 minutes running the AEG compressor was resting it worked absolutely nothing when AEG Mini Kompressor.Zum luck was still under warranty on the product and after complaining, and I send the Amazon yesterday that I
  • Perfectly despite slight improvement  

    AEG 97136 Compressor KD 7.0 - with digital printing code and shutdown, LED illumination, 12 Volt, max. 7 bar / 100 psi, incl. Accessories (Automotive)
    Good machine, light, compact, easy to stow. Even at higher tire pressures are needed for an increase in pressure of 0.3 bar for more than half a minute. After subjective feeling mean noise. Length of the 12V cable is sufficient in any case loose with
  • Prima's Little Helper  

    AEG 97136 Compressor KD 7.0 - with digital printing code and shutdown, LED illumination, 12 Volt, max. 7 bar / 100 psi, incl. Accessories (Automotive)
    This small, lightweight compressor is ideal to check air pressure and correct (upwards). However, one should not expect too much. Because of its size and the 12 Volt takes a normal car tire correcting by 1 bar has good three or four minutes. (So ​​co