Heatsinks for Raspberry Pi

Categories

  • Nice gadget for Raspberry Pi Model B 2  

    Heatsinks for Raspberry Pi (Set of 3 passive radiator) (Electronics)
    I use the heat sink (Chen) for a Raspberry Pi Model B 2 (a media player). There, however, is only one of the two small and large heatsink required. The temperature fell from 47 ° C to 42 ° C. Does that help the operation? No, not really. I hope for a
    Buy at Amazon.com

  • Good heat sink, but beware!  

    Heatsinks for Raspberry Pi (Set of 3 passive radiator) (Electronics)
    I can only recommend this heatsink, fit perfectly on the Pi. The Pi runs 24/7 and is not much warmer than 52 degrees Celsius. (When overclocking setting "Medium") So what to do - to preserve> Help the Pi a cool head.
    Buy at Amazon.com

  • Solid work, fit very well - at least questionable effect  

    Heatsinks for Raspberry Pi (Set of 3 passive radiator) (Electronics)
    To put it straight to the point, acting the parts solid, are simply glued and the adhesive pads look out durable. I have a test, buy and pursued the temperature difference over my monitoring system. I could not measure reduction. However, to save the
    Buy at Amazon.com

  • Heatsinks for Raspberry Pi  

    Heatsinks for Raspberry Pi (Passivkühler) (Personal Computers)
    The heatsink fit serhr well on the PI, the enclosed adhesive pads are well matched to the PI. With me keep this heatsink for two months without any problems.
    Buy at Amazon.com

  • Perfect fit and good adhesion  

    Heatsinks for Raspberry Pi (Set of 3 passive radiator) (Electronics)
    Good adhesion strength due to 3M adhesive film. The little bodies are absolutely ok. The major could be a bit wider. Then he would be derived more heat. Insgesmat I could the temp by almost 10 degrees lower in a housing. PI is running slightly overcl
    Buy at Amazon.com

  • Heatsink  

    Heatsinks for Raspberry Pi (Passivkühler) (Personal Computers)
    Heatsink Set for the Raspberry Pi! Adhesive pads hold good, easy installation and good cooling performance. We recommend! Helps to keep the temperature on hot summer days under the critical area!
    Buy at Amazon.com

  • fits and does what he is ...  

    Heatsink for the Raspberry Pi (Accessories)
    The cooler fits exactly for the Raspberry and is very easy to assemble. Simply pull off the foil and press on the heating pad. The temperature is lower in idle 2-4 ° C, under full load about 7-9 ° C. I highly recommend the small cooler
    Buy at Amazon.com

  • Cool down  

    Heatsinks for Raspberry Pi (Passivkühler) (Personal Computers)
    The heat sink becomes very hot during overclocking. So the parts are working as they should. Easy to install, fits perfectly. Recommended Acquisition
    Buy at Amazon.com

  • Raspberry Pi heatsink are recommended  

    Heatsinks for Raspberry Pi (Passivkühler) (Personal Computers)
    Hello There, would highly recommend this product. Got my Raspberry Pi overclocked to 900MHz processor side and the temperature remains betw. 51 and 53 degrees Celsius. The warranty does not go the way lost, as long as one does not increase the voltag
    Buy at Amazon.com