Inateck 2 5-inch USB 3.0 HDD External Enclosure

Categories


  • quick change of HDD, switch available, some windy presentation  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    The hard drive cage is fine and the AC works without screws, a switch for switching on and off is available, which I think is also very positive. USB cable (requires only one connection) is, 30cm, - also top. Only the processing is very spartan, simp
  • For my MacBook Pro obviously useless - low build quality - it too expensive  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    The housing should help me with the move to a Samsung SSD. The case came to a sufficiently large packaging together with a special USB 3.0 cable and a printed manual small. The case could be opened slightly hakelig. The small plastic tabs are not sui
  • Does their service with small, reasonable swabs  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    I use the case of a removed from the PS4 disk. Installation was quick and easy but the housing is pure, cheap plastic. Even its lead has only a USB end. Two I would have found better. Nevertheless, the board meets their service and I highly recommend
  • Very well thought out housing.  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    with on-off switch! And with a big USB port. The small USB ports of my other hard drive enclosure are in fact mostly mechanically weak and prone to wearing out or cancel. The housing is a huge success!
  • All prima 1  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    Plastic housing looks a little delicate, but snaps clean and does what it should. Prima that the housing has an arrival + switch. In short, does the job USB 3.0 I have not tested.
  • Latest batch of the article not recommended, would be to wait until the problem with the USB slot shifted fixed!  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    Some housing seem to have shifted a USB slot, sometimes only very minimal, which is of course a great pity because the USB connector then something goes in hard and is slightly curved. Apart from that, the USB 3.0 enclosure is recommended in terms of
  • Everything OK. Only quality of the plastic housing could be better.  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    Just taken with Samsung SSD 850Pro in operation. Installation without tools and easily. Then just make a clone with Carbon Copy from my MacBook Pro HDD to the SSD as a new internal HDD installed. Housing done so far his service as it should. Only the
  • The perfect case for 2.5 "HDD's and SSD's  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    We bought an estimated 50 of these housing over the past months. Each new laptop that is "old" hard drive technology (HDD) to a beautiful, fast SSD replaced. The HDD is then equal to a solid backup hard drive in this case. The USB 3.0 Controller
  • For Intel SSD Data Migration Software inappropriate - otherwise ok  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    The Inateck adapter works fine with an Intel SSD 530 Series on a Win7 PC. Unfortunately, the adapter grinds the hardware information of the inserted SSD not. It appears in the device properties always the Inateck adapter, but not pickled SSD. Thus, t
  • After about an hour it was over data transmission // Manufacturer HDD has repaired  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    Have exchanged for an SSD in my MacBook HDD. The one-year-old HDD I wanted to use for additional backups. For that I had worried the housing. The installation has worked wonderfully. But after about one hour data transfer via Mac to connect to the ha
  • USB 3.0 - 2.5 "SATA  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    Easily clip together, no screwdriver needed. Good speed over USB 3.0, pocketable and the most important for me: an on / off switch. No problems with Win 7 x64 Pro and Home. For the price (14.95) tip.
  • No standby  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    One can imagine the mechanical switches it already. This enclosur leaves no standby disk. Continuous operation of devices can thus destroy the plate, since they are usually not certified 24/7. Technical Information with HD Parm: ODROID @ ODROID: ~ $
  • Easy installation, good transmission performance  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    Since 4 weeks provides an "old" 2.5 "hard drive, the SSD had a soft, in this case their service. Thus it has now been held twice as long as the" brand housing ", which I had previously ordered. The installation was easy, the data
  • perfect for the desired use  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    As a substitute for a housing with 300GB hard drive in it, I ordered it. At this, the USB socket was damaged, but the record in order. By Inateck- case of replacement of old plate due to the easy-open lid and the only to be inserted hard drive was no
  • Top housing at a top price  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    I purchased the housing to install a Hitachi hard drive (500 GB, 7200 rpm, 7 mm) from my Thinkpad therein. Externally makes housing a clean processed impression a suitable USB 3 cable and an additional foam pad are listed. Open it can without tools,
  • Quick, handy and highly recommended.  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    I bought the case for an SSD. The transmission rate absolutely meets my expectations and by using an SSD is not also the risk that a HDD is damaged when shaken. Price-performance ratio = perfect. Highly recommended!
  • Real good case!  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    After I replaced the internal drive with a SSD in my mini-PC, I did not want to leave it in the corner of the now remaining 500GB disk. After a quick search, I then ordered this disk enclosure. After usual fast delivery through Amazon, I really just
  • Super for each disk  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    I have cleaned out two old broken laptop and installed the hard disk in the case of two. The installation was very easy, because everything can be done without tools. Only one pushes the housing, then comes in the hard disk and then you push the hous
  • Quick and easy to handle  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    This review is written quickly even if it takes much longer than to change the hard drives in Inatek housing. This is thanks to screw-free lid quickly and works without hooks and eyes. The transfer speed is thanks to USB 3.0 also excellent. In my vie
  • A screwdriver No Thanks  

    Inateck 2.5-inch USB 3.0 HDD External Enclosure Case for 9.5mm 7mm 2.5 "SATA HDD and SSD with USB 3.0 cable, werkzuglose installing HDD (optional)
    Perfeckt lightning fast hard drive purely to push ready hard drive out, etc just great with USB 3.0 and Funzt super good I'm really very excited well made and easy to open and close läst connected to a PC and USB 3.0 cable shoot the data back and for