Kaiser Lens Cover "Snap-On" with

Categories

  • Affordable and 66  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 62 mm (accessories)
    I bought the lens cap for my father, who had lost his original Tamron lid. According to him, the cover fits well and fulfills its purpose. The price he regarded as very low. Accordingly, I give the same resist here.
    Buy at Amazon.com

  • Better than the original! 20  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 58 mm (accessories)
    Hi, I have ordered the items on Amazon and as usual also get very quickly. The operation is simple and the quality is the original canon cover second to none. But why it is better than the original - is the loop! So I lose this cover is no longer gua
    Buy at Amazon.com

  • modern Deckelchen - for waste glass  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 62 mm (accessories)
    Bought for me this M42 old glass Deckelchen. With over 6 relatively expensive, therefore a trigger, but otherwise fine and even with ribbon. The traders learn it apparently slow that missing tapes cost points and damage its reputation ... ;-) On the
    Buy at Amazon.com

  • Delivered 2x Wrong Lens Cover  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 58 mm (accessories)
    I ordered this lens cap for my Canon 600D, die3 positive reviews speak for themselves. However, the seller could not make it to me after 2 orders actually sending a 58mm cap that fits on my camera, so I can not comment about this product
    Buy at Amazon.com

  • Patron 1  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 62 mm (accessories)
    Bought as a replacement for the original Sigma-cover - at a good price. Protect against the loss, the backup tapes should protect. Prima - but - in lens-change depends on the camera and the lid does not fit (for me) to be used lens. Have him so settl
    Buy at Amazon.com

  • Super part. Why can not Sony?  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 62 mm (accessories)
    I bought a Sony RX10. Unfortunately, this does not fuse on the lens cap. This product fits properly in the 62mm size. Thus my buy recommendation! But why Sony is not installed this simple assurance on lens cap beyond me.
    Buy at Amazon.com

  • Better than the original 19  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 52 mm (accessories)
    The original lens cap some compact cameras like my Nikon Coolpix are not very convincing, and so was my few days ago (was not using the supplied cord secured) simply in the woods off. As a substitute I bought the Kaiser 52mm cover with Snapon and bac
    Buy at Amazon.com

  • Highly recommended 152  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 58 mm (accessories)
    I bought this for my Nikon P7700 closure, so I can let screwed the lens hood as standard. The Schutzdeckelt does its job properly and the mustaches is very convenient because I can not lose the cap.
    Buy at Amazon.com

  • Keeps bombproof - and at a fair price  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 58 mm (accessories)
    Did the cover already for some time and can only say that the value for money is just great! And by the Schnuer will not lose it also. Buy recommendation!
    Buy at Amazon.com

  • fits 249  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 58 mm (accessories)
    as it should be, and move the or losing is part of the past, just with the cord attached to the digicam
    Buy at Amazon.com

  • Good quality at a low price 11  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 58 mm (accessories)
    When I had lost the original lens cap from Canon, I was just very sad. But now I'm even really happy! Because of this cap is much better on the lens securely in place firmly and slips when entering and clearing out of his pocket, or as in my case fro
    Buy at Amazon.com

  • Good and cheap !!! 197  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 52 mm (accessories)
    In the last emperor lens cap I ordered the tape really was very difficult to thread. This criticism has taken apparently to heart, because this time it is equal to it. The lens cap fits and is well made. It can be attached firmly, and remove. Would I
    Buy at Amazon.com

  • Good replacement for lost original  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 58 mm (accessories)
    Despite the greatest care of my original lens cap my Canon EFS_18_55 is now at last been lost. I had always feared and thus not happen to me again, I bought this cover with the retaining cord. At first glance it looks as if this cover could be applie
    Buy at Amazon.com

  • A perfect fit for Canon lenses with Ø 58mm  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 58 mm (accessories)
    My standard Canon lid is repeatedly gone off by itself (when pulling out of his pocket or the slight counter thrusting) and as I have the stupid cover then finally lost, I ordered this cover with assurance. The new lid fits perfectly and sits much be
    Buy at Amazon.com

  • Top-118 product  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 58 mm (accessories)
    Very solid and processed accurately. No sharp edges. The optics makes a very high-quality impression. Can be very good application and removal. Through the "internal control" very well also be used with an attached lens hood.
    Buy at Amazon.com

  • Fits! (Lumix G2)  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 52 mm (accessories)
    Power from a processing perspective, an excellent impression, fits on both lenses of my Lumix G2 and a SKYFILTER, is well set up and solve, because you can press on it from outside. The cord collect is really not that hard, I had feared worse. The ho
    Buy at Amazon.com

  • Good protection cover  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 58 mm (accessories)
    bought the protective cover for my Canon G12, to protect the patch filter adapter, holds great, the loop is very convenient to fix the protective cover on the camera.
    Buy at Amazon.com

  • Cap fits and stops  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 52 mm (accessories)
    Is easy to install; The cord I like the previous speaker with a thin nylon cord (goes safely even with very thin wire) threaded through. To search the hole it took me a while. Small sketch or photograph would be useful. Toll is: The cover works well
    Buy at Amazon.com

  • Solid quality, threading cord impossible  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 52 mm (accessories)
    I am completely satisfied with the quality of this lens protection cover. The lid keeps safe even in botched threads. The mechanism is smooth and solid. Only in securing cord I see a need for improvement (or in the recess of the cord). As the area be
    Buy at Amazon.com

  • Better than the original 3 1  

    Kaiser Lens Cover "Snap-On", with lens cap fuse ø 58 mm (accessories)
    Benefits: 1. The lid clamped better than the original Canon = better protect the lens and the filter thread 2. supplied strap serves as captive Disadvantage: 1. If the strap is attached, it is always in conflict with the lens hood. When pulling out o
    Buy at Amazon.com