Scanpart milk frother

Categories


  • Great whorl  

    Scanpart cappuccino maker (accessories)
    This is a great whorl. The milk is super foamed. This is also at 0.3% lactic. Since you can take it for salad dressings, I find him super well in the price.
  • defective very inexpensive but fast  

    Scanpart cappuccino maker (accessories)
    I condensed the aufschäume to Kafee years (in the cup) and my old equipment Weaknesses showed I had bought this part a few months ago before to reserve status. About 3 weeks ago, it was put into operation, The 12 cm long mixing paddle (too long) then
  • This time, a total letdown, significant imbalance  

    Scanpart cappuccino maker (accessories)
    We had already ordered the third frothers of this variety. The first two we were reasonably happy. With daily use, they should last for about a year, then switch and bearings are so worn out that a good function is no longer guaranteed. But for 6 eur
  • There are probably two grades  

    Scanpart cappuccino maker (accessories)
    these bought in December 13 is one of the bad ones. As already described the common axis was crooked and when immersed in the milk whisk loses so much momentum that no longer foams the milk. I can only advise against it and have complained about the
  • Can I throw away  

    Scanpart cappuccino maker (accessories)
    The rod bends fast times when he is accidentally misfiled and thus it is almost impossible to restore the Rotationssymetie and in the end it says: no longer usable because of the milk frother is suddenly the vibrator. The energy is transferred to the
  • Caution right has power!  

    Scanpart cappuccino maker (accessories)
    I just wanted to have a coffee, because the postman will ring. The Scanpart milk frother in hand, I thought: This fits now but good. Unwrapped, two Duracell AA batteries in and tried the same. Batteries go in a little hard, but they do not rattle aro
  • And there is still the milk to ... UPDATE  

    Scanpart cappuccino maker (accessories)
    UPDATE: The device is a battery-eating monster, so a star deduction (already no longer quite so fresh batteries can power significantly after). Since I switched from capsules to coffee from the French press, I was to be provided on the search for a w
  • good foam, but after 2 months it scrap  

    Scanpart cappuccino maker (accessories)
    the milk froth is really good, but high battery consumption and both devices were defective after 2 months it. The purchase can only be discouraged.
  • Twice after four months break  

    Scanpart cappuccino maker (accessories)
    I wonder if all the good reviews were only made spontaneously, or whether they would even yet after 6 months: I had broken two of those things, and they were both after 4 months. If they work, then they are really good, but keep a little longer, they
  • Ruck Zuck solid milk froth  

    Scanpart cappuccino maker (accessories)
    This frother works perfectly. Very quickly a solid foam is produced. Then the little mini-engine but too little force has to maintain the speed, because the resistance of the foam well is too great. I'm curious times the durability.
  • Short-lived and some significant design defects  

    Scanpart cappuccino maker (accessories)
    The device has now appreciated by ca finally delivered 2 months the spoon. Function hitherto impeccable. Among the deficiencies: The inner values ​​are cheaply. Due to the defect are used carbon brushes of the motor. The motor now runs no longer, unl
  • Little man with lots of power  

    Scanpart cappuccino maker (accessories)
    After my old milk frother from Fackelmann had given up the ghost, I needed a new one. After a short investigation, I came to the Scanpart Milchaufschäumer because of the good ratings. This frother corresponds completely to my expectations. He feels t
  • Good milk frother  

    Scanpart cappuccino maker (accessories)
    As expected, this is a good cappuccino maker. Batteries purely and already makes it a wonderful milk foam. Whether with cold or warm or hot milk. Just a pity that there is no support or the like for the foamer. But still not a problem. The price is h
  • Very good / cheaper milk frother but broken after 9 months  

    Scanpart cappuccino maker (accessories)
    I have had several favorable milk frother and it runs nice and round and is easy to use, as well as the batteries run too long with it. Addendum: After about 9 months the milk frother has given up the ghost :-(.
  • Stable foam!  

    Scanpart cappuccino maker (accessories)
    An acquaintance of mine has the Senseo Aero Chino system which has excited me really, as I have seen the will for it proclaimed almost 120, I assembled a Lowcost variant. Take this milk frother and a stainless steel milk jug: the milk jug to fill abo
  • Smaller and Smarter Milchaufschäumer !!  

    Scanpart cappuccino maker (accessories)
    Great cappuccino maker, which you can also keep fast times in a cup. Does not work with any milk lactose free ... 1.5% is not so good ...
  • Finally a more durable milk frother  

    Scanpart cappuccino maker (accessories)
    After several have cheap milk frothers that after a few weeks abandoned their ministry this was chosen by me. And what can I say. The device does what it should, is easy to handle and the slide switch is easy to use. Even the soup stir (from the bag)
  • Too strong!  

    Scanpart cappuccino maker (accessories)
    The unit is (unfortunately) so strong that a cup (0.2l or 0.3l whether) the milk is pressed even with small amounts of frothing from the vessel. Therefore only 3 stars!
  • Durable, powerful, stable - trouble milk froth  

    Scanpart cappuccino maker (accessories)
    After my third Severin SM 9669 milk frother, black conked out regularly after less than three months has (electric motor every time worn), I have now tried the cappuccino maker by Scanpart. After nearly daily continuous use for over half a year, I ca
  • After a week break  

    Scanpart cappuccino maker (accessories)
    Unfortunately only one week held, the switch or motor stopped going. Inside was nothing to see. If he does, he does some nice foam. However, the foamer is not removable and the device is not waterproof, which complicates the Renigung something.