USB to TTL converter module with built-in CP2102

Categories


  • Well done, abder problem with DCD  

    USB to TTL converter module with built-in CP2102 (Electronics)
    In itself, well done, more signals are available via solder. The DCD input can be retrieved from the computer but only by polling, not with TIOCMIWAIT so that the module for the GPS / second pulse was not useful. It is good that you can flash the Pro
  • shr works well, but without housing and with only one set of cables rather than short-term term tinkering solution useful  

    USB to TTL converter module with built-in CP2102 (Personal Computers)
    Works fine with me and is easy to customize through the open design. The mitgeleiferte harness fit with me unfortunately on the "other" side never, because the pins were thinner and shorter, but one has his cable box or his soldering iron :) A h
  • Affordable and funktioniell, but no documentation  

    USB to TTL converter module with built-in CP2102 (Personal Computers)
    I use the converter for a Arduino per Mini 3.3V. Conversion to 3.3V is not quite self-explanatory. On the underside of the board is an option to select the output voltage, either 3.3 or 5 V is (must be set by Lötdurchzug to this voltage). The Board h
  • Has worked well in the O2Box!  

    USB to TTL converter module with built-in CP2102 (Electronics)
    I needed this converter to read the access my O2 box. Worked out fine! Now I can finally use my FritzB and mothball the SchrottO2Router.
  • Conveniently, but still good  

    USB to TTL converter module with built-in CP2102 (Personal Computers)
    The adapter is working properly and make an overall solid impression. Only the solder joints of the USB connector on the PCB could have been carried out quite a bit cleaner.
  • Serial USB Serial  

    USB to TTL converter module with built-in CP2102 (Personal Computers)
    Very small and very simple to use. With WIN7 were no Driver problems. Become a few order yet. At this price you can not do anything wrong.
  • USB to Serial TTL converter, suitable for standalone ATMega328  

    USB to TTL converter module with built-in CP2102 (Personal Computers)
    I've been looking for cheap USB to Serial Adapter to upload sketches for a ATMega328. That was not so easy, because many of these adapters are available - often without sufficient information on the pin assignment. This adapter is labeled CP2102 Brea
  • Very good use,  

    USB to TTL converter module with built-in CP2102 (Personal Computers)
    This module is for use in several weeks, after which the driver was updated, it runs without interruption and without interference. Delivery incl. Cable should be mentioned. This can be started immediately with no extra time for cable production.
  • Very easy, good, cheap  

    USB to TTL converter module with built-in CP2102 (Personal Computers)
    I bought the converter for experiments with the Raspberry Pi and ATMEL microcontroller and am sher satisfied. Runs flawlessly on Ubuntu (12:04 LTS) if you have time parameterized interface. Would I buy again at any time, but is still working)
  • USB TTL  

    USB to TTL converter module with built-in CP2102 (Personal Computers)
    I have this part ordered to revive my Seagate hard drive. It has solved this problem by installing the driver for Win7, all I wanted. The delivery took place earlier than announced, thus all the best.