Wentronic HDD mounting kit 2 5 '3 5 "

Categories


  • The lower mounting holes do not match those of a 3.5-inch hard drive  

    Wentronic HDD mounting kit 2.5 "to 3.5" (Accessories)
    However, adjust the lateral mounting holes so I could the SSD hard drive, despite their low height somehow tighten the housing. So not optimal, but still usable.
  • SSD bracket Top  

    Wentronic HDD mounting kit 2.5 "to 3.5" (Accessories)
    Of course you need a SSD mounting kit for installation of an SSD. This low budget product is simply gone and just great. All that is required is, trouble-free installation.
  • Keeps hard drives  

    Wentronic HDD mounting kit 2.5 "to 3.5" (Accessories)
    I have the article itself for about 2 months. It is used to attach a 2.5 "SSD hard drive in a 3.5" bay of the desktop unit. positively the slot is largely free from burrs (no sharp edges) the screws are good and engage in the thread there are bo
  • Was probably revised ...  

    Wentronic HDD mounting kit 2.5 "to 3.5" (Accessories)
    Contrary to the previously written negative reviews my product was delivered in perfect condition. My frame was supplied in black and not in silver / gray as in the photo. (I is only afterwards saw that indicated in color "Sort". Since you insta
  • Installation is simple with the frame  

    Wentronic HDD mounting kit 2.5 "to 3.5" (Accessories)
    In some reviews it has already been mentioned that the frame was painted after the threading, but yes that's right the screws if you have already saved clean before installation and screwed back out make this fact away. What do you expect for the pri
  • Well. serves its purpose  

    Wentronic HDD mounting kit 2.5 "to 3.5" (Accessories)
    Mounting screws are made to soft meltall, thread was pre-cut on one side only, rather spend 2-3 euros more and buy what gscheites when half an hour annoy
  • For me it was perfect perfect ...  

    Wentronic HDD mounting kit 2.5 "to 3.5" (Accessories)
    So I had in mind here because of the reviews that the framework does not fit exactly. For me it was not a pressing but no problem at all, necessary. Therefore I can only recommend the thing.
  • A mounting kit ...  

    Wentronic HDD mounting kit 2.5 "to 3.5" (Accessories)
    consisting of a piece of metal with 2 x 4 screws. When installed in my HP desktop the set sat very crisp - two tenths less and it could perfectly gepast. The value for money (at least in comparison) is good. Exactly as shown the assembly kit is actua
  • consistent quality and fit  

    Wentronic HDD mounting kit 2.5 "to 3.5" (Accessories)
    The assembly has certainly made problems during installation, because the fit is not right. The frame is a few tenths of a millimeter too wide - That sounds by little, but means that you (with a mounted disk) receives the frame only with a very large
  • But useful  

    Wentronic HDD mounting kit 2.5 "to 3.5" (Accessories)
    Not bad the holder and at the price I would have cleaned the thread but it was not necessary. All screws were easy to unscrew. Clean painted no sharp edges. Price / performance super