During my circular saw pretty rough deal also with a fine saw blade with the workpiece, can be personalized with the Bosch tool nigh surgical cuts, perpendicular as well waagerecht- place. This was evident in the adaptation of stucco-frames from the Art Nouveau: even with long miter cuts of stucco remained completely intact, while the miter saw but rather crude went down to business. It is gratifying that inexpensive accessories from the building or supermarket -at this actually quite expensive device -without More are compatible. The noise level is enormous; he is actually to bear with ear protection. Very fiddly is the mounting of the individual parts with the fixing screw, especially that needs to be tightened more frequently; that the Bosch people remembered nothing better here, but it is surprising.
A total letdown is the delta sander. After 2-3 minutes the supplied emery leaves detach from the delta disk; they wander slowly sideways, no matter how you hold the device. Apparently the fine checkmark are on the delta disk that you want to cling to the underside of the textile emery paper, too short to hook themselves firmly. This was evident when comparing with a solid 30-Euro delta sander from the DIY store. I am surprised that Bosch can go through such a recognizable design flaw. So far as one is looking for a functional delta sander, it is with this device at the wrong address.