Garmin mount for bicycle: Oregon Dakota 62 64 eTrex 10/20/30 Alpha 100 T5: Garmin

Categories


  • Very good. Keeps safe and reliable  

    Garmin mount for bicycle: Oregon, Dakota, 62, 64, eTrex 10/20/30, Alpha 100, T5 (Electronics)
    Despite some of the negative reviews I decided to buy the original bike mount for my 62s. I fastened by means of the cable tie to the handlebar. At first I thought, in addition to put a piece of old inner tube as anti-skid pad between cable ties and
  • Without rework unusable!  

    Garmin mount for bicycle: Oregon, Dakota, 62, 64, eTrex 10/20/30, Alpha 100, T5 (Electronics)
    The holder itself serves its purpose very well. I have attached to the top tube of my bicycle. Keeps the rubber bottom with two cable ties very well, even against rotation. BUT: Operates up to the Oregon 600 easy to slide onto the mount and take off
  • Unfortunately, not true to size  

    Garmin mount for bicycle: Oregon, Dakota, 62, 64, eTrex 10/20/30, Alpha 100, T5 (Electronics)
    After I've already bought two of these bicycle racks and this fit perfectly, I have ordered a third me. This did not fit perfectly. The GPSMAP could be attached only with violence and barely removed. Not very helpful for a short break if you want to
  • Could hold even tighter  

    Garmin mount for bicycle: Oregon, Dakota, 62, 64, eTrex 10/20/30, Alpha 100, T5 (Electronics)
    The holder serves its purpose well. You could hold a little tighter. But all in all it is great and stays in place only if there is very strong jolts or unfällt the bike.
  • Does not keep enough  

    Garmin mount for bicycle: Oregon, Dakota, 62, 64, eTrex 10/20/30, Alpha 100, T5 (Electronics)
    I bought 2 wheels and 2x this bracket. Why Garmin, not what has developed better for its outdoor GPS that cost 300 upward, is my question. Recently, I have a road bike with the I drive almost every day and my achievements constantly Increase. Now it'
  • To determine, too loose, too expensive  

    Garmin mount for bicycle: Oregon, Dakota, 62, 64, eTrex 10/20/30, Alpha 100, T5 (Electronics)
    I bought the mount for my eTrex 20. In principle, the system works like this: The bracket is fastened with cable ties on the bike, and put the unit in, until it clicks. To remove one presses down on the tab and pulling the unit out of its holder. In
  • Sorry Garmin, so not ....  

    Garmin mount for bicycle: Oregon, Dakota, 62, 64, eTrex 10/20/30, Alpha 100, T5 (Electronics)
    In a nutshell: This is a holder for an outdoor unit (in my case Etrex30), is the least I can expect that the holder fulfills "Outdoor claims". She does not in my opinion. The latching between Navi and bike mount is stable - the fixing by the cab