Linksys Dual Band Wireless N300 WAP300N Access Point 1

Categories


  • Linksys Dual Band Wireless N300 Access WAP300N  

    Linksys Dual Band Wireless N300 WAP300N Access Point 1 Ethernet port WDS functionality (Bridge, Repeater) removable R-SMA antenna (Accessories)
    Note the device: Am IT technically for many years out of practice, therefore, there were problems with the configuration. Partially could help Cisco Support, partially I came even to the solution. Device without a CD, with patch cables attached to NB
  • Linksys WAP300N  

    Linksys Dual Band Wireless N300 WAP300N Access Point 1 Ethernet port WDS functionality (Bridge, Repeater) removable R-SMA antenna (Accessories)
    I am very satisfied with the access point. My Experience: 1. Installation and commissioning - takes about 10-20 minutes and is very easy thanks to its own setup application. You just have to connect the device to the mains and follow the setup applic
  • 2.4 GHz with rather weak performance  

    Linksys Dual Band Wireless N300 WAP300N Access Point 1 Ethernet port WDS functionality (Bridge, Repeater) removable R-SMA antenna (Accessories)
    Have two devices tested and have the following observed in both: the 2.4GHz module is unfortunately rather useless. Speeds on the LAN (when copying for example) with only 6.5 Mbyte / s. By comparison, a 20 TP-Link AP creates as constant 10.2Mbyte / s
  • Good transmit power  

    Linksys Dual Band Wireless N300 WAP300N Access Point 1 Ethernet port WDS functionality (Bridge, Repeater) removable R-SMA antenna (Accessories)
    For a basement room I have the access point gained me. The transmission power on the lower level is excellent. What surprised me the very simple configuration, which was completed in less than 5 minutes.
  • Klappts Now  

    Linksys Dual Band Wireless N300 WAP300N Access Point 1 Ethernet port WDS functionality (Bridge, Repeater) removable R-SMA antenna (Accessories)
    The first time I ordered the Web Interface or the connectivity via the supplied software has repeatedly adopted. Unable to make a change without the initial configuration, the device must be disconnected from power and then be able to configure again
  • Solid quality, good function  

    Linksys Dual Band Wireless N300 WAP300N Access Point 1 Ethernet port WDS functionality (Bridge, Repeater) removable R-SMA antenna (Accessories)
    Have this buy because a friend who is familiar with the matter, Linksys has recommended. The installation is very easy as long as you have a PC at hand. Very clear, very quickly. The unit was ready for use in less than 3 Muniten. The radio performanc
  • Very good access point  

    Linksys Dual Band Wireless N300 WAP300N Access Point 1 Ethernet port WDS functionality (Bridge, Repeater) removable R-SMA antenna (Accessories)
    Unwrapped connected, and set to work as it should. Contrary to some reviews, I can determine the name of the new radio network very well. Slow boot after setting change does not bother me. I change the settings so not every day. It makes sense a firm
  • Does what it should if it is established  

    Linksys Dual Band Wireless N300 WAP300N Access Point 1 Ethernet port WDS functionality (Bridge, Repeater) removable R-SMA antenna (Accessories)
    I bought the Linksys WAP300N since my WLAN coverage was not given specifically on the top floor and in the garden. As described in reviews, the decor is really easy, but extremely slow because after each small change the device restarts. The surface
  • Works, menu slowly, "Dual Band" but only a band selectable  

    Linksys Dual Band Wireless N300 WAP300N Access Point 1 Ethernet port WDS functionality (Bridge, Repeater) removable R-SMA antenna (Accessories)
    First of all, the most important: The router works. It runs so far in a not very easy to clean environment with many WLANs in an office building with no funny business. Reason for acquiring this particular device was pre-configuration as AP. Exactly
  • Runs stably and quickly  

    Linksys Dual Band Wireless N300 WAP300N Access Point 1 Ethernet port WDS functionality (Bridge, Repeater) removable R-SMA antenna (Accessories)
    This equipment has been manufactured by Linksys, when it was still part of Cisco, hence the inscription. Since the beginning of 2013 but Linksys Belkin belongs, therefore, you probably can not see an update for the firmware 1.0.0. This disrupts reall
  • Good antennas but weak menu  

    Linksys Dual Band Wireless N300 WAP300N Access Point 1 Ethernet port WDS functionality (Bridge, Repeater) removable R-SMA antenna (Accessories)
    The Linksys WAP300N the former consumer division of Cisco, which now belongs to Belkin, has been appointed to work as a repeater. Therefore, one anticipates setting up an access point (AP) was possible super easy and no CD or manual. It becomes more