LogiLink Cable Tester RJ11 RJ12 RJ45 with Remote

Categories


  • China scrap, but still satisfied.  

    LogiLink cable tester RJ11, RJ12, RJ45 with remote unit (accessories)
    Have equal unpacked and tested. had a bag there. An LED was already broken (cold solder joint), but no problem myself am an electronics is soldered fast and well. For the price I would buy again.
  • Cable Tester for Loconet  

    LogiLink cable tester RJ11, RJ12, RJ45 with remote unit (accessories)
    Appointed on recommendation and try out and bought. Ease of use, low price but high battery drain, always keep a 9V block in reserve
  • Smooth letdown  

    LogiLink cable tester RJ11, RJ12, RJ45 with remote unit (accessories)
    Have cable and the tester ordered from this supplier and almost returned everything. The reason was the tester, who has represented the very favorable than unshielded cable. A Cat5 or Cat6 is as good as an old Cat3. How can that be. Another reviewer
  • Cheaper Rotz  

    LogiLink cable tester RJ11, RJ12, RJ45 with remote unit (accessories)
    So, well, he seems to be able to test cables, which he is supposed to. So far I could not install still undergoing a field test, but with me rumliegenden cable seem to be OK. But the processing of the device is really the last, the "pocket" is q
  • limited, as supplied, ready to go!  

    LogiLink cable tester RJ11, RJ12, RJ45 with remote unit (accessories)
    It can only test the 4 wire pairs. According device description but also to the cable screen can be checked. To this end, missing one LED in the major and minor device. For an e-technicians no problem; with about 0.50 and an easy fix einm soldering i
  • Cheaper network cable tester  

    LogiLink cable tester RJ11, RJ12, RJ45 with remote unit (accessories)
    The cable tester is powered by a 9V battery. Simple RJ11 or RJ45 cable end plugs into the master and remote part and you can start the test. After switching on the device, the individual cable wires are automatically tested one after the other. So de
  • Inexpensive and does what it is!  

    LogiLink cable tester RJ11, RJ12, RJ45 with remote unit (accessories)
    The device is very inexpensive and does what it should. It checks for strength program sequence all 8 cores and additional shielding continuity. The program can optionally undergo fast or slow; the slower variant is preferable. An error in a permanen
  • Simple without much functional but works  

    LogiLink cable tester RJ11, RJ12, RJ45 with remote unit (accessories)
    The illuminate the leds, which was described to me, can be fixed easily. simply open the unit and paint the LEDs on the side with a marker and is already lit by nothing. The device is very simple and is basically just to which wire is which is connec