Mini PIR motion for installing

Categories


  • Versatile because compact  

    Mini PIR motion for mounting (accessory)
    The function of the device corresponds to the description: Twilight switch to (<10Lx) or, sensitivity high or low, switching times in 6 increments of 5 s to 8 min. -. That's it. The merchant sends with a detailed German connection and operation fo
  • Am very unhappy! 1  

    Mini PIR motion for mounting (accessory)
    I want to implement an indirect step lighting in the stairwell with this motion. Thanks to its small size, the process was very simple and was also one of the main points why I had decided on this indicator. I have over time eight (8) bought and inst
  • Achieved the desired function  

    Mini PIR motion for mounting (accessory)
    The mini PIR motion was used to implement an automatic staircase lighting and is doing really well. There were 2 PIR detectors (1 * for the staircase, 1 * stairway) fitted, switch the stair lighting (LED light bars). Unfortunately, the light sensitiv
  • Micro Motion  

    Mini PIR motion for mounting (accessory)
    The motion detector is used in me to a circuit LED strip on a tripping stage. Visible is only the 5-cent piece-large sensor, the electronics disappears in a cavity wall. My motion was an instruction manual in which the circuit is displayed correctly.
  • Motion stops working  

    Mini PIR motion for mounting (accessory)
    After about 2 1/2 months spins the motion. Until that time, he has worked as it should. Coverage and reaction were perfectly adequate for use in the bathroom. Silk days a few spins of the detector. He simply had not turned on the first time. Trying t
  • After 5 days faulty  

    Mini PIR motion for mounting (accessory)
    At first I was excited. Motion worked flawlessly, turned quickly, and after the set time and again. Unfortunately went after about one week of operation, the light no longer sufficient. Once disconnected from the mains has helped it had again to work
  • Super inconspicuous!  

    Mini PIR motion for mounting (accessory)
    So small that it prima in our outdoor lamp fitted with pure, drilled hole for sensor! Works as described! One star deduction, because the lamp is only to turn on the sensor.
  • Small but powerful 42  

    Mini PIR motion for mounting (accessory)
    The smallest motion detectors I know. Easy to hide cavities, sensor drill eistellen clips by time and sensitivity and OK.Sichtbar remains only the small sensor. Clear Emphelung. Jürgen
  • does what it is supposed 113  

    Mini PIR motion for mounting (accessory)
    Works great. Is very sensitive. Despite the small sensor of the detection angle is super. The only drawback: if you use the daylight function (with sufficient light is not switched) on the motion after the set time from always, regardless of whether
  • reliable relay circuit for bulb and LED, but at low light sensitivity  

    Mini PIR motion for mounting (accessory)
    Switches with an audible clacking relay and a delay of just under 1 sec both a light bulb of 60W as well as an LED of 6W. The motion sensitivity is appropriate. The light sensitivity but not - even with completely sufficient brightness, the detector
  • Best replacement for built-in motion sensor outdoor lighting  

    Mini PIR motion for mounting (accessory)
    Since the built-in motion in my outer wall lamps are seemingly not so insanely durable (failure rate 5 of 8), I bought later this motion. It is advantageous that the sensor already has a cable connection to the electronics. The case I have removed an
  • Very small and reliable motion  

    Mini PIR motion for mounting (accessory)
    I have this motion installed in the kitchen and am very satisfied so far. He switched on the light and somewhat delayed by the Good range and again until, when I leave the room. But first you have to connect it properly !! That's not easy. The descri