einhell circular table saw review

Categories


  • Table saw  

    Einhell TE TS-1825 Table Circular Saw 1800 W - 6000 t / min - 4,340,560 (Tools & Accessories)
    Not necessarily obvious to build this table saw is proving very stable once assembled. Good product for a non intensive use. Quality and low price. This saw on that table is still cumbersome portable without having to dismount. Would recommend for an
  • Converts a table saw in a precision tool  

    Precision miter gauges system (Automotive)
    A table saw can work just as good at the end, as is practicable in the attacks. In addition to high-quality saw blades and a careful organization, I've just indulged these Kreg- attack and regretted it for a second. Cross-sections can be performed ac
  • Blade fits into my table saw  

    Einhell saw blade 250x30x3,2mm 60Z Stat. Saws accessories (tool)
    The saw blade has been delivered quickly and meets my expectations. It also fits in my table saw, the running direction is, however, so that the label is now obscured.
  • One of the top table saws  

    Makita 2704 table circular saw (tool)
    Although I'm no carpenter, but when it comes to the cut, it should be precisely and reproducibly. Therefore, on closer inspection due to precision and setting accuracy fell all table saws under 500, - out of the race. + Riving knife in all directions
  • small and cheap table saw  

    EBERTH TC3-EH600 Table Saw 600 Watt 200mm (Misc.)
    The TK was (almost) been delivered completely assembled and is also for the proposed price is a real bargain. The engine is torquey and even relatively quiet. Unfortunately I had to return it because the forecast table was unfortunately a bit too sma
  • Chop saw OK, enough table  

    Einhell RT-SM 305 L train-Kapp-miter m. Undercarriage, 1,800 W, blade Ø 210 x Ø 30 mm, double-bearing traction function, laser, soft start (tool)
    Would like to make 2 reviews of it. 1) Saw: Bin of my previous activity used as an assembly joiners and carpenters other cross-cut saws. But knew when I bought the saw no Elu, Festo DeWalt or into the house to earn. The more surprised I was when I us
  • Real good circular saw - especially to em Price  

    Bosch PTS 10 T Home Series Table Saw + undercarriage (1,400 W, saw nominal Ø 254 mm) (Tools)
    I am an amateur carpenter who builds racks in the household. Da me my circular saw with 550W äuserst upset I decided to invest money and buy a table saw. I was afraid before a huge bill because such devices are very expensive very quickly. But I came
  • Circular saw blade Optiline Wood  

    Bosch Accessories 2608640444 circular saw blade Optiline Wood 254 x 30 x 2.8 mm, 60 (tools)
    For my new circular saw from Bosch me is really nothing too expensive Ok, the saw blade is not exactly cheap but it does a good job making a clean cut And that's I think the most important If you've had a Schnäpchen makes at the table saw at Amazon i
  • Large circular saw for a small price!  

    Circular Saw Circular Saw Kingcraft Laser 1300 W Saw blade 2x Top virgin (Misc.)
    Actually I wanted to "only" a 45 ° cut in two kitchen countertops (38mm) have. Placing an order at the hardware store would GWES expensive, so I bought the King Craft Laser 1300 also because in my older table saw from Metabo are the same size sa
  • Compared with Einhell RT-AP 1050E  

    Makita reciprocating saw JR3050T 1010 W (tool)
    .... The saw top. For +50 you really get a better saw. But how did it come to compare. As part of my conversion in the house I had my front and back gardens of various trees and tree roots free. Additionally had to be removed from the house old woode
  • Good budget saw blade for fine woodwork  

    HM saw blade 250 x 30 with 60 teeth, circular saw blade (tool)
    So far the inexpensive circular saw blade has 250 mm in diameter with 60 teeth does ETS1825 good in my new collapsible Ryobi table saw. The fine-cut up to 88 mm height in the timber is perfect. The saw blade is therefore recommended for the fine wood
  • Good precision saw  

    Bosch PTS 10 table circular saw Home Series (1,400 W, saw nominal Ø 254 mm) (Tools)
    Unpacking and setting up takes 35 minutes. It would be faster if the instruction is not "improvement" would be. Not only that Bosch follows in the footsteps of other manufacturers and guidance for many other languages ​​makes, the print quality
  • A very good all-sucker!  

    Kärcher multipurpose sucker MV 5 P, 1.348-194.0 (tool)
    The Kärcher MV 5 P is one of the most efficient wet-dry vacuum cleaner from the new series. I like the unit very well. The performance is for almost all aspects more than adequate. The sucker can be adjusted with a knob in its performance. I use the
  • Soso only for cars ... because of  

    Meguiars Swirl Remover Polish, 450ml (Automotive)
    I had quite a few scratches on my table in glossy white, and no I'm not talking about coming from the normal use of the scratches from cleaning or you eh only sees in the sun and accurate perspective. I had the Clean probably make a too "rough"
  • Ansich a great workshop vacuum cleaners  

    Einhell TE-VC 2230 SA Wet-dry vacuum cleaner, 1150 W, 220 mbar, 30 l, stainless steel container, synchro start socket, long tube, wide range of accessories (tools)
    Caveat: I have a little getting on in days Dyson, the suction to actually liked so far. But I quickly realized that he is no good in my hobby wood workshop. The dust collector at the (old) Dyson is a joke and after 1x 65m² apartment cleaning already
  • Good device that amortsiert quickly  

    Einhell BT-SH 90/350 saw blade sharpening device (tool)
    Property me the blade-sharpener risen since I work a lot with the circular saw, the cross-cut saw and table saw. All saw blades have a different diameter, besides that, I've gained for different materials leaves with different numbers of teeth. A goo
  • The cheapest useful TKS on the German market  

    DeWalt table saw, 1700 W, 250 x 30 mm, 77/57, DW745-QS (tool)
    On the German market, I come to this conclusion after careful research, there is beneath this saw only overpriced, useless garbage. See my review for mobile Holzmann TKS. And the price is already three to four times higher than the bottommost drawer.
  • Assembling etc ....  

    Mannesmann table saw with stand, 1500 W, M12853 (tool)
    Who expects a detailed assembly instructions in this table saw, looking in vain - because there are none. A bit disappointing, considering that this is a German brand! So you're on your own with it and all the accessories and aimed at best after the
  • For exactly one purpose very well  

    Neutechnik Präz. jigsaw table for each jigsaw - base unit (Misc.)
    I just had me even rigged up a jigsaw table when I came across this model. I bought it, built it together (good guide with clear pictures) and now had an opportunity to compare the two tables together: First, the function of such a table. My requirem
  • A nice toy with fun for the hobbyist!  

    Bosch PTS 10 table circular saw Home Series (1,400 W, saw nominal Ø 254 mm) (Tools)
    On the whole I am satisfied with the table saw. I had previously had a circular saw in use - as this table saw is of course a quantum leap in woodworking! 2 things are but who with me prevented a maximum number of points. 1. The suction device is not