Logilink Adapter USB 2.0 to 2 5 + 3 5 inch IDE + SATA

Categories


  • PSU has only 2A 5A not how long was on the website and at retailers! Customer service inadequate  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    After further inquiry at the manufacturer's customer support was told that it was an error on the website and the PSU only 2A and 5A has not. Sorry no one has it also. It is also not willing to send me a 5A power supply manufacturer. It refuses even
  • At first glance good ... 1  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    If you want to save the Leserei may like to scroll down to the CONCLUSION. Already during mating emerge with most likely question mark: Why are here 2 SATA power cable? Simply because use 3.5-inch hard drives 3.3, 5 and 12V. 2.5 inches but mostly onl
  • Connection breaks constantly from  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    Hello, I have a part for the first time in operation. Have tried 2 different 2.5 SATA hard drives to be connected to the computer. Every time the same error, that is all well recognized in Windows 7, but the connection breaks off every 2-3 minutes. M
  • Allows to use a removed hard drive  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    I could connect with parts from this set a well-developed from a foreign device hard drive using the included USB cable to my computer (bring previously on the disk the jumper in the 'master' position!) And access it. Problems with the power supply (
  • Crunching at Plextor burner  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    Practice ten minutes because the DVD burner Plextor has not been recognized. Cause of the problem was that the IDE and the Voltage Connector only with violence on the burner were side by side insert, ie no scope millimeters. If the voltage connector
  • Great Bundle with everything you need!  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    My external, 2TB hard drive was unfortunately the mind on why I had tried once to build the thing out of its external enclosure and connect directly to the computer. Since this worked much needed an adapter to the hard drive directly to the USB port
  • Absolutely worth the money 1  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    The adapter has shown me when switching to an SSD excellent services. I have a very narrow PC case with only two LW slots and wanted to use an SSD in parallel with the DVD burner and occasionally operate the old HDD outside the PC to this adapter. Th
  • So I imagine a HDD adapter before  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    The adapter (incl. All other parts) is well made and works properly when using the device correctly. From experience, I use this adapter as follows: Connecting the adapter to the drive, creating power to the hard drive and then plug in the USB port o
  • Item is awesome!  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    I've just tried this product and it is just awesome and not complicated at all ... So I would connect a stick!
  • Plug of the worst quality  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    The plugs from the power connection cable between the power supply and SATA / IDE connectors are so bad that after the first mating is no electrical connection was available. I am going to split the connector and the cable ends soldered directly, hop
  • LogiLink AU0006C IDE / SATA adapter (USB 2.0 to 6.4 cm (2.5 inch) / 8.9 cm ... LogiLink  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    The item is as described, the decor is very extensive. One need only connect the adapter and the hard disk is already read.
  • Device is ok - but tricky  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    I'm very satisfied with the adapter. Power not the most solid impression, but met fully its purpose. I had initially major problems to connect a 2.5-inch IDE hard drive. The PC do not want to recognize the device and then I have desperately wanted dr
  • Destroyed hard drive  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    After I connected a 3.5-inch SATA hard disk to the adapter, black space rose by approximately 2 seconds of it. The board has previously run smoothly both in a PC, as well as at another adapter. Now both the hard drive and the data is lost it.
  • Functional, but something "cheap"  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    I bought the Logilink Adapter to connect my internal hard drives externally to other computers can. This works wonderfully: Drivers are found quickly recognized the plate quickly and transfer data in a good speed. However, the processing could be a b
  • 2.5 IDE works fine, 3.5 ide was not driven  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    I could connect using my 10-year-old 2.5-inch IDE hard drive from my old laptop easily on my Mac and my RaspberryPi via a USB hub, access data and format properly this adapter. However, my old 3.5 IDE hard drive was not activated (Seems as if the cur
  • Dyscalculia with the designers?  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    What you'd expect from such a product? .. Well, you put it to the corresponding interface and it does the job. But then you have not reckoned with the product designers. The hardware engineers Although done their job, because the unit is operating as
  • Do not trust any description  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    To make it short, the device works perfectly, when it will run out! I am not a fan of user manuals, but this time I've looked at it and thought to myself "well, 3 sets can be read even once." I repeated the described in the package insert p
  • Tip device, bootable, Compatible  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    There have been already written some opinions on the device, but in my opinion some important details are still missing: - You can use this adapter EVERYTHING that an IDE or SATA connection has operated, in other words that still are of ancient hard
  • Mint Multi adapter  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    I have just ordered the second adapter of this type, since I already am fully satisfied with the first. The plug-in system is mostly in the laptop bag on the go. In mobile use, it has proven itself when connecting normally internal optical drives. -A
  • Genuine all-rounder  

    Logilink Adapter USB 2.0 to 2.5 + 3.5 inch IDE + SATA HDD OTB - storage controller - ATA / SATA 1.5Gb / s, AU0006C (Accessories)
    Hello everybody, I have this USB hard drives bought Adapter, because a friend of mine wanted to back up data from your laptop, but the display was broken! After I removed the 2.5-inch hard drive, I've connected via this adapter to your PC! 1. The fri